Other

User-changeable color grids for Amphion 15" loudspeakers, available in 8 RAL color options with custom colors available on request, designed to match speakers to interior design preferences.

User-changeable color grids designed to match Amphion 18" loudspeakers to interior design preferences. Available in eight pre-selected RAL colors as well as custom colors upon request.

Adjustable wall brackets that allow Amphion home audio speakers to be mounted securely to walls without requiring additional floor space. Available in black and white, compatible with Argon1, Argon0, and Helium510 speaker models.

Replacement aluminum passive radiators for Amphion studio monitors, designed to protect woofers during low-frequency operation. Surrounds can wear over years of use and are designed to be user-replaceable as part of Amphion's sustainability approach.

Heavy-duty zero-flex steel wall and ceiling mount adaptor for Amphion studio monitors, compatible with König & Meyer mounting hardware. Enables pin-point accurate imaging for immersive studio setups.

Replacement aluminum woofers for Amphion studio monitors, designed to restore accurate and controlled low-frequency performance after wear from high-volume use. Sold per piece as part of Amphion's sustainability and repairability approach.

FreeBass is a UHF diversity wireless system designed specifically for bass guitar, engineered to faithfully reproduce the low frequencies and high dynamics of a bass signal over a wireless link. The receiver adds a Modeling control that selects between 16 DSP-enhanced bass settings. Both receiver and transmitter feature large backlit displays and an intuitive menu for frequency selection, sensitivity and muting.

The FS-1 is a single-button latching footswitch with a heavy-duty 4-metre cable. It is compatible with MAG and Toneman 300/600 EVO III heads and combos.

The FS-2 is a dual-button latching footswitch with a heavy-duty 4-metre cable. It is compatible with the Rootmaster EVO and EVO II range to engage and disengage Valve Drive and Sub Harmonics.

The FS-4 is a heavy-duty four-button ABM footswitch with a detachable 2.5-metre cable, allowing control of Valve Drive, EQ, Compression and Sub Octave. It is used with the ABM-500/900 EVO III and ABM 300/600/1200 EVO IV.

Audeze’s custom-built travel case is the perfect way to protect your headphone investment, even if you drop it, spill liquids on it, bring it to a Head-Fi meet or the recording studio. As long as your headphones are in this case (and it’s closed), it’ll keep them safe.

Audeze Silicone Eartip set for Euclid headphones, including small, medium, and large pairs. Audeze accessories are designed to work only with Audeze headphones, and offer no warranty when used with other headphones.

Replacement microphone for the Audeze Maxwell, Mobius and Penrose gaming headsets.

Replacement accessories for iSINE LX, VR, 10, 20, LCDi3, and LCDi4 headphones, including ear hooks, ear fins, eartips, and a cleaning tool.

The LCD-4 floating Carbon Fiber Headband provides comfort for hours of listening pleasure available for all LCD series.

Audeze LCD ear pads. Compatible with all Audeze LCD headphones except LCD-1 and LCD-5. Available in leather and leather-free variants.

Our LCD Spring Steel Suspension Headbands are designed to distribute weight evenly across your head, reducing hotspots and promoting comfort for extended listening sessions!

The Audeze LCD-5 and 5s feature a totally redesigned frame, including our newest iteration of the Carbon fiber headband. Fully tension adjustable with the included tools, these headbands provide hours of comfortable listening. Please note, these headbands are only compatible with headphones with the redesigned frame, including LCD-5, LCD-5s and MM-500 and will not fit our standard LCD series headphones.

Audeze offers 1” longer custom-machined yoke rods that allow the earpads and drivers to extend farther around the head.

Audeze LCD-5 earpads are available on our website! LCD-5 earpads are compatible with LCD-5 headphones.

Audeze LCD-S20 ear pads are available on our website. LCD-S20 earpads are compatible with LCD-S20 headphones.

Maxwell 2 earpads. Made from PU leather and memory foam. A newly redesigned geometry features a wider opening for improved comfort. The Audeze Maxwell 2 earpads are comfortable for long gaming sessions.

The Maxwell 2 headstrap. Also compatible with the original Maxwell. Features an increased width and a perforated strap for increased comfort. Dimensions 70mm x 256mm. Material PU Leather.

Replacement low-latency 2.4GHz USB-C wireless dongle for the Audeze Maxwell 2 wireless gaming headset. Sold in Xbox and PlayStation versions; not compatible with the original Maxwell.

Original Maxwell earpads. Made from PU leather and memory foam, the Audeze Maxwell earpads are comfortable for long gaming sessions.

The original, non-perforated Maxwell headstrap. Also compatible with Maxwell 2. Dimensions 46mm x 256mm.

Replacement low-latency 2.4GHz USB-A wireless dongle for the original Audeze Maxwell wireless gaming headset. Sold in Xbox and PlayStation versions; not compatible with Maxwell 2.

Cloth carry bag for MM-100 headphones. Features the MM Series Logo.

Audeze MM-100 ear pads are available on our website! MM-100 earpads are compatible with MM-100 Professional headphones.

Audeze MM-500 ear pads are available on our website! MM-500 earpads are compatible with Audeze MM-500 headphones.

The Audeze MM-500 features our newest headband design. Flexible and easily adjustable, this is the perfect fit for your gear.

Replacement memory foam ear pads for the Audeze Mobius and Penrose wireless headphones. All color variants fit all Mobius and Penrose models.

Audeze offers 1” longer custom-machined yoke rods that allow the earpads and drivers to extend farther around the head.

Audeze's custom-lined economy travel case is a more affordable way to protect your headphones from everyday wear and tear. Less rugged than the premium aluminum LCD case, but great for light and everyday use to and from the studio.

Wide-band active directional antennas for improved reception (522-865 MHz). May be used with standard coaxial cable with BNC connectors. Features include 15dB of amplified gain to make up for signal loss over distance. Ideal for use with the ADS48 antenna distribution system.

Two-channel 48V phantom power supply for condenser microphones. 110V is switchable to 240V. Detachable power cord.

The APS910 is a professional phantom power adapter designed to convert 9-52 volts of phantom power to 2.5-volt electret microphones with an internal impedance converter and internal load. It's supplied with a wide range of AUDIX electret condenser microphones.

Optional phantom power adapter for use with electric condenser microphones. Runs on AA batteries when phantom power is not available. Features on/off switch and bass roll-off filter. Connectors are standard XLR-m to mini XLR-m.

Modular capsule adapter with the OM2 dynamic VLM capsule. For use with the H60 wireless transmitter.

Modular capsule adapter with the OM5 dynamic VLM capsule. For use with the H60 wireless transmitter.

Modular capsule adapter with the VX5 condenser capsule. For use with the H60 wireless transmitter.

Passive junction box and cable-management accessory for Audix installed microphones, with seismic and fire-safety cable restraint.

The LCB1 is a discrete button designed to remotely control the on-off functions of a microphone (or other devices) when used in conjunction with a logic-enabled media system for video and teleconferencing.

AUDIX Novacore NCC2 is a dedicated 2-bay charging station built for the Novacore digital wireless ecosystem. Compact and easy to use, it is compatible with Novacore handhelds, beltpacks, as well as the AUDIX lithium-ion rechargeable batteries directly.

Brass plenum bell housing. Specifically designed to provide a plenum seal with threaded on to the plenum junction box.

Professional impedance matching transformer that allows a low impedance microphone (100-600 Ohms) to be connected to a high impedance input (10k – 50k Ohms).

Machined 1/2-inch calibration adapter for the TM1 and TM1 Plus microphone to attach to the Bruel and Kjaer 4231 sound level calibrator.

The DPH12 is a drum holder designed for use with Austrian Audio's OC7, OD5, CC8, and CC8-SC microphones. It provides a secure mounting solution for attaching these condenser microphones to drum shells or percussion instruments during studio sessions and live performance.

Replacement ear cushions for the Austrian Audio Hi-X50 on-ear headphones.

Replacement ear cushion set for the Austrian Audio Hi-X55 over-ear headphones.

The Hi-X55CUK is a replacement ear cushion kit for the Austrian Audio Hi-X55 headphones. Designed to support the long-term serviceability of the Hi-X55, this kit allows users to replace worn or damaged ear cushions and maintain the original comfort and acoustic performance of the headphones.

Replacement ear cushion set designed for use with the Hi-X65 and Hi-X60 headphones.

Replacement ear cushion kit for the Austrian Audio Hi-X65 and Hi-X60 headphones.

Replacement headband cushion for the Austrian Audio Hi-X headphone series. Compatible with Hi-X65, Hi-X60, Hi-X55, Hi-X25BT, Hi-X15, Hi-X20, PG16, and The Arranger.

The MCH1 is a microphone clip accessory designed for use with Austrian Audio handheld microphone models including the OC707, OD505, and OD303.

MiCreator Minibar desktop stand accessory for the MiCreator product line. Compatible with MiCreator Satellite and MiCreator Studio.

MiCreator System Case — a storage and carrying case for the MiCreator product line. Compatible with MiCreator Satellite, MiCreator Studio, and MiCreator Y-Lav.

Set of 4 blank customization plates (2 front, 2 back) in white and black for personalizing the MiCreator Satellite microphone system.

Set of 4 blank customization plates (2 front, 2 back) in white and black for personalizing the MiCreator Studio microphone system.

Protective microphone pouch compatible with OD303, OC707, OD505, CC8, OC16, OC18, and OC818 microphones.

The OCC8 is a replacement capsule for the Austrian Audio OC818 large-diaphragm condenser microphone.

Aluminum dual carry case designed to protect and transport two Austrian Audio OC818 or OC18 large diaphragm condenser microphones.

Microphone clamp for OC818, OC18, OC16, CC8, CC8-SC, OC7, and OD5 microphones.

The OCP8 is a protective cap/cover accessory for Austrian Audio microphones. Compatible with the OC818, OC18, OC16, OD505, OC707, and OD303.

The OCR8 is a Bluetooth dongle that enables wireless control of the OC818 microphone. It pairs with the free PolarPilot smartphone app to let engineers and musicians remotely control polar patterns, pad settings, and high-pass filter settings in real time.

Stereo recording bracket compatible with Austrian Audio condenser microphones, designed for dual microphone stereo setups.

Replacement suede leatherette ear cushions for The Composer headphones.

Spacer plates for The Composer headphones, used to adjust ear cup positioning or acoustics.

Protective travel case designed specifically for The Composer reference headphone.

Replacement ear cushion inner set (ECIS) for The Composer flagship headphones by Austrian Audio.

Replacement ear cushion upper set (ECUS) for The Composer flagship headphones by Austrian Audio.

The Befaco 7U Backpack is a padded, expandable carrying bag purpose-built to transport the Befaco 7U Case, with a dedicated laptop compartment, cable-organizer pockets, and cabin-friendly dimensions.

Anodized aluminum nuts designed for minijack connectors, following the Buchla/Serge color-coding standard. These accessories enable users to color-code their audio inputs and outputs or enhance the aesthetic appearance of their synthesizer equipment.

Knurlies are the first screws specially designed for Eurorack. Engineered by Befaco to make re-arranging your case a matter of minutes, they are available in M3 and M2.5 sizes with a 7mm length and include a flat-tight washer to prevent rack damage.

The Befaco Synth Duster is a super-soft cleaning brush designed to keep modular synthesizers and audio equipment free from dust accumulation. It is a non-electronic maintenance accessory with no patch points or power requirements. Compact and purpose-built for use in and around Eurorack cases and studio gear.

Neutrik SpeakON cable plugs sold by Benchmark Media Systems for building speaker cables. Available in NL2 (2-pole) and NL4 (4-pole) variants. Sold individually.

Rack-mounting solutions that join two half-width 1U Benchmark components or mount a single unit alongside a blank plate in a standard 19-inch rack. Available as a coupler kit or as a premium blank plate in silver or black.

Rack mounting tray that accommodates two half-wide 1U Benchmark units in a single rack space. Compatible with all half-wide DAC1, DAC2, DAC3, ADC1, and MPA1 units, with or without rack ears.

Die cast aluminum infrared remote control for Benchmark Media Systems audio components, featuring dedicated input selection buttons, a -20 dB DIM button, and separate on/off buttons for universal remote integration.

Premium 8mm gold-plated locking banana connector for speaker wire. The barrel-twist locking mechanism expands inside the binding post socket for a very low resistance connection. Accepts 10 AWG to 4 AWG wire. Sold individually.

Engineered 36-inch speaker stands for the Benchmark SMS1 monitors with multistage sonic isolation and decoupling at every contact point. Black anodized extruded aluminum column with three internal channels for cable management and ballast fill. Sold as a pair.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

Smart Panel is a modular Eurorack blank panel made of separable 4HP tabs that can be resized or reused as needed, and can also be drilled for custom DIY faceplates.

VOLT55 is a compact Eurorack power supply delivering up to 100W via a single USB-C Power Delivery connection, featuring three USB-A ports for powering external devices and flyingbus connectors for distributing power to modules.

Take-anywhere premium travel guitars that feel like your full size instrument.

A padded woven polyester gig bag designed to fit the Blackstar Carry-on ST guitar and Carry-on Mini guitar, with an ergonomic carry handle, backstraps for hands-free transport, and a zipped accessory pocket.

Discontinued

Bring your existing system right up to date with Formation Audio wireless audio streamer. Access 24-bit/96kHz hi-res audio on your hi-fi, include it in a multi-room set-up, even stream analog sources like turntables to Formation wireless speakers.

Discontinued

Enjoy optimum performance from your Formation Flex with this floor stand by Vogel's. With the speaker at the perfect height for seated listening, it's ideal for using Flex as part of a surround-sound system or for stereo listening.

Discontinued

Experience flawless stereo focus and soundstaging with stands designed by the Bowers & Wilkins acoustic team for your Formation Duo wireless stereo speakers. Position Duo at the perfect height, give Duo the perfect support, then sit back and let their performance transport you.

Discontinued

Get ultimate positional flexibility for your Formation Wedge wireless speaker with the specially designed Bowers & Wilkins wall bracket. Optimized support for maximum audio enjoyment - and your Formation Wedge can be the center of attention, or as discreet as can be, at the same time.

Premium 600 Series S3 loudspeaker stand. Get the best possible performance from your 600 Series stand-mount speakers with the dedicated speaker stand.

High-performance 700 Series S3 loudspeaker stand. The stand-mount speakers in the 700 Series work best on these elegant FS-700 S3 stands, available in black and silver finishes.

A dedicated loudspeaker stand engineered to optimize the performance of the Bowers & Wilkins 805 D4 standmount loudspeakers. Available in Silver and Black finishes.

Achieve the best possible performance for your 805 D5 loudspeakers with these dedicated stands.

Dedicated centre-speaker stand engineered for the Bowers & Wilkins HTM81 D4 and HTM82 D4 flagship centre channels. Available in Silver and Black finishes.

Premium M-1 speaker stand. M-1 is among our smallest and most adaptable speakers, and the bespoke FS-M-1 stand only adds to its versatility.

A premium wall bracket produced specifically to complement the look, finish, and design of the Bowers & Wilkins Zeppelin speaker. Fits the 2021 Zeppelin only.

A humidity control kit that keeps large instruments in an ideal humidity zone for months, minimizing fluctuations that can damage the instrument.

A premium soft case designed to protect a concert body size guitar, made from water-repellent ripstop material with a fleece-lined interior and padded neck and body support. It includes stowable backpack straps, a padded back panel, and an accessory pocket.

A premium soft case designed to protect a dreadnought body size guitar, made from water-repellent ripstop material with a fleece-lined interior and padded neck and body support. It includes stowable backpack straps, a padded back panel, and an accessory pocket.

A premium soft case designed to protect a parlor body size guitar, made from water-repellent ripstop material with a fleece-lined interior and padded neck and body support. It includes stowable backpack straps, a padded back panel, and an accessory pocket.

A travel case designed for dreadnought and concert-size guitars, featuring a padded compartment with adjustable neck and waist support, a laptop sleeve, a main storage compartment, and accessory pockets. It includes premium hardware, a stowable harness system, and an integrated rain cover.

A 5-inch truss rod adjustment tool with a precision 4mm Allen wrench and a wood handle, sized to fit all current Breedlove guitars for adjusting neck relief.

The Bricasti MDx is an internal upgrade board that adds network streaming and Ethernet connectivity to compatible Bricasti DACs including the M1 Series II, M12, and M21. It supports Roon, AirPlay 2, and UPnP playback and installs in the factory expansion slot.

A set of 3-inch heavy duty caster wheels for the TRx3118A subwoofer.

A padded carrying bag that holds two TRx3900 or TRx3903 column speakers, featuring a velcro closing flap and two side pockets.

A replacement 8-ohm, 1-inch high frequency driver assembly used in several Carvin guitar and bass combos and pro audio loudspeakers.

A complete replacement 8-ohm high frequency driver used in several Carvin loudspeakers.

A protective cover designed to fit the TRx3118A 18-inch subwoofer during transit and storage.

A heavy duty vinyl cover designed to protect two TRx5118A subwoofers during transport and storage.

A heavy duty vinyl cover designed to protect four TRx5210AN line array units during transport and storage.

A protective cover for the QX15A loudspeaker with removable front and rear panels allowing the speaker to operate while covered.

A protective cover for the SCx12A loudspeaker with removable front and rear panels allowing the speaker to operate while covered.

A ground transport dolly designed to move two TRx5118A subwoofers or four TRx5210AN line array elements, featuring 5-inch swivel casters with locking brakes.

A direct replacement diaphragm for the HT-151-16 high frequency driver assembly used in numerous Carvin loudspeakers.

A 12-inch 4 ohm replacement woofer used in Carvin SCx12A loudspeakers.

A 15-inch 4 ohm replacement woofer used in several Carvin loudspeakers.

A 15-inch 8 ohm replacement woofer used in several Carvin loudspeakers.

A 3.5-inch 8 ohm replacement driver used in the Carvin TRx3900 column array loudspeaker.

Rigid plastic carry case with custom foam cut-outs for safe storage and transport of the Coles 4030L studio ribbon microphone.

Stereo mounting bar for dual placement of the Coles 4030L microphone, with adjustable head-to-head positioning between zero and 90 degrees for M-S and coincident stereo configurations.

Rigid plastic carry case with custom foam cut-outs for safe storage and transport of the Coles 4038 studio ribbon microphone.

Stereo mounting bar for dual placement of the Coles 4038 ribbon microphone, with bi-directional positioning adjustable between zero and 90 degrees for coincident stereo and M-S configurations.

Rigid plastic carry case with custom foam cut-outs for safe storage and transport of a single or stereo pair of the Coles 4050 ribbon microphone.

Stand adaptor for the Coles 4038 microphone with built-in XLR connector, providing a direct connection to both the microphone stand and output cable in a single brass-finished unit.

Stand adaptor for the Coles 4038 microphone with built-in XLR connector and phantom power blocker, preventing 48V phantom power from reaching the ribbon element when used with preamps that cannot disable phantom independently.

Anti-vibration stand adaptor for the Coles 4038 microphone with built-in phantom power blocker, combining mechanical vibration isolation with protection against 48V phantom power reaching the ribbon element.

Replacement PVC handle grip covers for the Coles 4104 Commentators Microphone. Available individually in brown or as a multi-pack of 5 colours.

Clip-on hygiene mouth shields for the Coles 4104 Commentators Microphone, providing a sanitary barrier between the user and the microphone head. Supplied in packs of 10.

Rigid plastic carry case with custom foam cut-outs for safe storage and transport of the Coles 4104 Commentators Microphone or the 4115 Broadcasters Microphone.

Soft velvet bag with drawstring closure for protecting Coles ribbon microphones from metal particles and dust contamination during studio use. Available in Large (for the 4038) and Small (for the 4050).

A replacement power supply for your NiftyCASE.

A padded bag with a compartment for your NiftyCASE, a pocket for patch cables and power adapter, and a clear molded lid for storage while fully patched.

BigEARS is a slick way to put 2 NiftyCASEs together and make a Nifty Stack for double your NiftyCASE fun.

Get the latest operating system for your instrument flashed on an industrial quality 8GB microSD card.

This 'wall-wart' style adapter outputs 9 Volts DC (regulated) and can supply a maximum of 1300mA, with a 2.1mm center-positive tip.

This replacement keypad works with all Organelle models and can be used to repair glitchy or unresponsive keys.

USB-WiFi adapter that connects to an existing 2.4GHz wireless network. Does not generate an access point.

The EOL Box is used as an End of Line (EOL) termination in audio systems that use a 20kHz pilot tone to detect open and short conditions in loudspeaker circuits.

Four-channel rack-mount step-up transformer accessory that provides 70V/100V constant-voltage outputs for Crown ComTech DriveCore amplifiers that lack built-in high-impedance output capability.

A 2 pole, 4 position rotary switch with a 16mm diameter and 15mm shaft, used in the CubuSynth Engine module.

Peace, Love & Fuzz is a book by Steve Ridinger telling the amazing story of Danelectro guitars, Snark tuners, and Foxx pedals. It chronicles Ridinger's entrepreneurial journey, including his founding of FOXX pedals, the 1998 relaunch of Danelectro guitars, and the creation of Snark tuners.

A dedicated control accessory for the Darkglass Alpha·Omega 500 and Alpha·Omega 900 bass amplifiers, enabling hands-free control of the amp's distortion engine and mute function during performance.

A dedicated foot controller for the Alpha·Omega 900 amplifier, giving stomp-away access to the Clean, Alpha, Omega, and Mod channels plus compressor and mute, with three programmable channel switches and a mute switch.

A compact, light, water-resistant nylon padded carrying bag designed for the Microtubes 900 amplifier head, with exterior pockets for cables, strings, and the Intelligent Footswitch, plus backpack straps and a carry handle.

The Intelligent Footswitch is an intuitive yet versatile accessory for Darkglass amplifiers, letting players engage the Microtubes Engine or mute the amp with foot commands.

Discontinued

The Super Intelligent Footswitch gives foot control over a Darkglass Microtubes 500 or 900 bass amplifier. Buttons switch between the Clean, Vintage Microtubes, and Microtubes B3K sections, and a Mute button silences the amp for tuning or set breaks.

FILL THE VOID. Designed for your vocal rig (and anything else!). Perfectly oversized to fit your Echo Master, mic, cables, power supply, mic stand clip, and more. Take everything you need to the stage in style. Built for the road in durable vinyl with a sturdy YKK zipper.

A blank prototyping circuit board with labeled power, ground, and audio I/O buses for designing custom Colour modules compatible with the Colour Palette.

An alternate horizontal-orientation front panel for the OLA5 Optical Compressor, made from anodized aluminum matching the stock panel. It can be swapped in by removing the knobs and mounting screws.

A simple discrete opamp kit with pre-mounted SMT components, designed as a version of the API AP2520-style opamp with a standard 990/2520 footprint.

A dedicated speaker stand designed for the Dutch & Dutch 6c, providing a stable and acoustically optimized foundation with an open design for freestanding placement.

A dedicated speaker stand designed for the Dutch & Dutch 6c, providing a stable and acoustically optimized foundation for console, desk or studio placement.

A stand designed in-house to support 8c speakers in a domestic environment, with sand-fillable construction for minimum resonances and a bolted mounting platform.

A one-time upgrade for the 8c Studio loudspeaker that adds direct streaming capabilities, digital sync, streaming logic and access to current and future streaming sources, and enables use of the BACCH plugin.

A black powder-coated steel U bracket for the 8c Studio, supporting pole, ceiling, or wall mounting with holes for standard clamps or pole mount adapters.

Features a heavy-duty steel tripod base and double-braced legs.

Designed with a 13″ seat top, and the strength of a cast, under-seat, vise mount and double-braced legs.

Designed with a full-size, molded, tractor-style seat top for ergonomic comfort.

AirLift thrones are the next evolution in DW throne technology.

AirLift thrones are the next evolution in DW throne technology.

This round top has a full 14″ round seat made of a special combination of foam for stability and comfort.

This round top has a full 14″ round seat made of a special combination of foam for stability and comfort.

Features a 14″ tractor top with a combination of foam for stability and comfort.

This reusable hard plastic case is full of vital spare parts.

Offers a woven nylon exterior, a telescopic pull handle, and wheels for ease of transport.

A splicing block for cutting and joining 1/4" tape echo tape and mastering tape.

A kit containing two replacement tape loops and a set of self-adhesive replacement felts for the Roland Space Echo series.

A pair of replacement tape loops for the Ace Tone EC-10 tape echo.

A pair of replacement tape loops for the Ace Tone EC-20 tape echo.

A replacement capstan motor for The Plex Tube Echo Chamber, offered as a user-replaceable part.

A pair of replacement tape loops for Copicat solid state tape echo units.

A pair of 51cm replacement tape loops for the Dynacord Echocord Mini tape echo.

A pair of 51cm replacement tape loops for the Dynacord S65 tape echo.

A replacement tape feed bearing for the Echo Fix EF-X2, EF-X3 and EF-X3R tape echo units.

A replacement power supply for the Echo Fix EF-X2, EF-X3 and EF-X3R, rated 100-240V AC input with 24V DC 2 amp centre-positive output.

A brand new replacement playback head for Echoplex EP1, EP2, EP3 and EP4 tape echo units.

A brand new replacement record/erase head for Echoplex EP1 and EP2 tape echo units.

A pack of five precision made tension spring arms for the Echoplex EP1, EP2, EP3 and EP4 and Fulltone TTE/SSTE tape echos, used as part of regular servicing.

A pair of replacement tape loops for the Echo Fix EF-X2, EF-X3 and EF-X3R tape echos.

A pair of replacement tape loops for HH tape echo units with a rich tone and high echo output.

A pair of replacement tape loops for the Klemt Echolette NG51 tape echo.

A pair of replacement tape loops for the Korg Stage Echo SE-300 and SE-500 tape echo units, matching the original tape type.

A pair of replacement tape loops for the Mirano 3R-S tape echo.

A pair of replacement Hall effect ICs for Roland Space Echo motors branded Pioneer and Nidec.

A rebuild kit for Roland Space Echo motors that includes bearings, Hall effect ICs, motor shaft oil and bush grease to fix excessive wow and flutter or starting issues.

An improved pinch roller with low friction bearings for Roland Space Echo units, manufactured to original specifications to replace deteriorated rubber rollers.

A custom replacement oscillator coil for RE-201, RE-101, RE-150, RE-301, RE-501 & SRE-555 tape echoes. It requires slight modification to install due to a different pin footprint.

A pair of replacement case latches for Roland Space Echo models RE-201, RE-101, RE-150, RE-301 and RE-501.

A replacement pinch roller arm solenoid to suit Space Echo Models RE-101, RE-201, RE-301, RE-501 and SRE-555.

A replacement power switch for the RE-501 & SRE-555 tape echoes.

A 110-120 Volt AC replacement power transformer for the Roland RE-150, RE-301, RE-501 & SRE-555, allowing conversion from a Japanese 100v or 220v transformer for use on 110-120v power systems.

A 220-240 Volt AC replacement power transformer for the Roland RE-150, RE-301, RE-501 & SRE-555, allowing conversion from a Japanese 100v or USA 110v transformer for use on 240v power systems.

A re-printed and laminated replacement lid instruction card for the RE-201, providing English instructions in place of the original Japanese lid card.

A re-printed and laminated replacement lid instruction card for the RE-301, providing English instructions in place of the original Japanese lid card.

A complete service kit for the Roland Space Echo RE-501 and SRE-555, including tape loops, tension spring, felt set, tape feed bearings and an improved green pinch roller.

A re-printed and laminated replacement lid instruction card for the RE-501, providing English instructions in place of the original Japanese lid card.

A kit of electrolytic capacitors for re-capping the Roland RE-201 and RE-101, supplying the values needed to suit all PCB revisions used during production.

A 120 Volt AC replacement power transformer for the Roland RE-201 and RE-101, allowing conversion from a Japanese 100v or 240v transformer for use on 120v power systems.

A 220-240 Volt AC replacement power transformer for the Roland RE-201 and RE-101, allowing conversion from a Japanese 100v or USA 110v transformer for use on 240v power systems.

A kit of electrolytic capacitors for re-capping the Roland RE-301, supplying the values needed to suit all PCB revisions used during production.

A kit of electrolytic capacitors for re-capping the Roland RE-501 and SRE-555, supplying the values needed to suit all PCB revisions used during production.

A pair of replacement cabinet lid screws for the Roland RE-501.

A replacement roller arm assembly for Roland Space Echo models.

Two replacement tape loops for Roland Space Echo units, made with high quality tape for rich tone and reliable self oscillation.

A set of four larger rubber feet for Roland Space Echo models RE-201, RE-101, RE-150, RE-301 and RE-501.

A set of four smaller rubber feet for Roland Space Echo models RE-201, RE-101, RE-150, RE-301 and RE-501.

A replacement sealed upper motor bearing for Roland Space Echo units, addressing wear that causes excessive wow and flutter and can burn out the motor.

A replacement solenoid eye bolt for Roland Space Echo models.

A set of 7 replacement screws that attach the wooden cabinet to the metal chassis of Roland Space Echo units, including RE-101, RE-150, RE-201, RE-301, RE-501, RE-100 & RE-200, custom made to original spec.

A replacement motor mount spacer for Roland Space Echo models.

A drop-in replacement brushless DC motor for Roland Space Echo units that originally used Pioneer or Nidec motors, supplied with a cable loom requiring no soldering.

A set of replacement self-adhesive felts for the tape path of the Roland Space Echo series.

A 100 metre roll of 1/4-inch splicing tape used for making or repairing tape echo loops.

A pack of five stainless steel replacement thumb nuts for the tape bay of Roland Space Echo models and Echo Fix EF-X2 and EF-X3.

A stainless steel replacement thumb nut for the tape bay of Roland Space Echo models RE-101, RE-150, RE-201, RE-301, RE-501 and SRE-555.

A 19mm diameter tape feed bearing replacement for Roland Space Echo units, essential to reduce wow and flutter.

A 22mm diameter tape feed bearing replacement for Roland Space Echo units, essential to reduce wow and flutter.

A replacement tape tension spring for Roland Space Echo units with a 19mm tape feed bearing, ensuring correct tape tension.

A replacement tape tension spring for Roland Space Echo units with a 22mm tape feed bearing, ensuring correct tape tension.

A replacement tape tension spring for the Echo Fix EF-X2 and EF-X3 tape echo units.

A replacement tape tray for the Echo Fix EF-X2, EF-X3 and Roland RE-201, RE-101, RE-150.

A DIY service kit for the Echoplex EP3 and EP4, including a pinch roller, tension springs with felt, drive belt, replacement tape, splicing tabs and a capacitor kit.

A precision-made replacement rubber pinch roller with low friction sealed bearings for the Echoplex EP1 and EP2 tape echo. It is a user-serviceable upgrade over the original rubber roller and is intended for use during regular servicing.

A pair of replacement tape loops for the Vocu VTE-2000 tape echo.

A new replacement VU meter designed to fit the Roland Space Echo RE-201, RE-150, RE-101 and RE-301 units with serial numbers above 49950.

A replacement lamp (bulb) for the VU meter used in the Roland Space Echo range including RE-101, RE-150, RE-201, RE-301, RE-100 and RE-200.

A compact hardware unit that comes with a Seed3 module installed, used for building and running embedded audio applications.

A compact embedded audio platform module for prototyping and embedding audio hardware projects.

Seed3 is an embedded audio hardware platform featuring a 32-bit, 192kHz audio codec, an ARM Cortex-M7 MCU, and onboard USB-C for power and data transfer, maintaining pin compatibility with the original Seed. It is programmable in C++, Arduino, Max/MSP gen~, and Pure Data for prototyping and embedded commercial audio applications.

Protective Lid PL-5 - Hard plastic protective lid for ultimate protection. Fits: Tonverk.

A spatial audio enhancement license for Sea of Thieves that provides an Enhanced Headphone Mode for a more immersive gameplay audio experience.

The official ESP hard shell form fit case. A larger version of the CEXFF, this fits the LTD EXL-200 guitar.

The official ESP hard shell form fit case. Fits the JD-I guitar.

If you're ready to start playing bass, the LTD B Series Bass Pack from ESP contains everything you need to get into the world of bass playing. No matter what musical style you want to pursue, from metal to funk, reggae to punk, this is your starting point on the road to greatness! It includes an LTD B Series bass with a powerful ESP bass pickup and volume/tone controls. You also get a 15W bass amplifier with 4-band EQ controls to dial in your preferred tone, and a headphone output for practice. Perfect for lessons and jams with friends, the LTD B Series Bass Pack also includes an electronic tuner, a 10' guitar cable, a nylon gig bag, and even a bass strap and picks! Whether you're playing for fun or for creative expression, this is the only affordable all-in-one bass pack with the quality, sound, and playability people expect from ESP!

The LTD EC Series Guitar Pack from ESP is everything you need to get started on electric guitar! Inside the box, you get an LTD EC guitar with two great-sounding ESP humbucking pickups. You get a 10W guitar amplifier with 3-band EQ and a headphone output for practice. There's an electronic tuner to make it easy to keep your new guitar in tune and sounding great. As if that wasn't enough, you also get a 10' guitar cable, a nylon gig bag to carry your guitar to lessons or jams with friends, a guitar strap, and even some picks. For beginning guitarists, the LTD EC Series Guitar Pack is your affordable entry point into the world of becoming a serious musician, with the quality and tone you need for inspiration and fun!

The LTD M Series Guitar Pack from ESP is everything you need to get started on electric guitar! Inside the box, you get an LTD M Series guitar with two great-sounding ESP humbucking pickups.

Starlight is a Eurorack blank panel with a slowly pulsing night-sky LED display that fills unused HP space in a modular case.

Restore your EVH 5150 100-watt head's footswitch functionality with a genuine replacement EVH footswitch. This 4-button footswitch allows you to quickly toggle between the channels and engage the effects loop.

Restore your EVH® 5150® 50-watt combo's footswitch functionality with a genuine replacement EVH footswitch. This 4-button footswitch allows you to quickly toggle between the channels and engage the effects loop.

Accessories

Super-tough, multi-panel amp and cabinet covers, made from highly durable material to withstand the rigors of the road. Black with embroidered EVH® logo.

The power tubes used in all EVH® 5150III® 6L6 amps amps are finally available for everyone! The tube kit includes one pair of premium matched 6L6 tubes with EVH® graphics. Professional installation recommended.

The highly sought after pot previously only available on the Wolfgang USA guitar is now available to everyone.

The EVH D-Tuna® is a unique patented device that enables players to drop the E to D and back, in an instant. D-Tuna has been standard equipment on Eddie Van Halen's personal guitars as well as signature series locking tremolo-equipped guitars since the early 90's. Since then thousands of D-Tuna's have been sold all over the world. D-Tuna is proud to be endorsed by many professional players such as Warren DeMartini (RATT), Michael Wilton (Queensryche) and Dave "The Snake" Sabo (Skid Row) just to name a few. Bottom line...It's simple to use and it works.

These ECC83 / 12AX7 tubes are the same ones used in all EVH® branded amplifiers. These are perfect for maintaining your EVH amp, or an easy modification for another tube amp. Includes 2 tubes.

The power tubes used on all EVH® 5150III® EL34 amplifiers are finally available to everyone! The tube kit includes one pair of premium matched EL34 tubes with EVH® graphics. Professional installation recommended.

The EVH® Frankenstein™ Classic humbucking pickup takes inspiration from Eddie's original PAF pickup that he loaded into the first incarnation of the black and white super Strat®, as pictured in 1978 on the cover of the first Van Halen album. Personally designed by Eddie himself, ironically this unique pickup features 5150 winds!

Think of this pickup as a brand-new version of the original Frankenstein's battle-worn guitar pickup, wound to the exact original specs and built to fit in any humbucking-pickup-equipped guitar. One of the most famous humbuckers of all time is now available at a competitive price and serves as a great upgrade and alternative to the popular crop of cliché replacement humbuckers.

Accessories

At last, the exact same reflectors used on the EVH® Frankenstein™ are now available to everyone! This set includes four round red reflectors, two orange round reflectors and two oval orange reflectors. These make a great addition to any EVH® guitar.

The best way to transport or store your EVH® Stripe Series guitar is with this case! It features a red plush molded interior. A single storage compartment is perfect for straps, cables, picks, or any other accessories. The exterior features molded stripes, an EVH® logo, and durable TSA latches.

Transport and store your EVH® Wolfgang® guitar with confidence in this ABS molded case, featuring molded stripes, an EVH® logo, and durable fiberglass reinforced large nylon trigger release latches. The rigid EPS foam interior with high-grade plush interior lining create the ultimate in instrument protection while a single storage compartment is perfect for straps, cables, picks, or any other accessories. Combining advanced materials with a TSA-accepted locking center latch, this case will help your guitar arrive at its destination unharmed.

Sling your guitar over your shoulder with total performance reliability, versatile sizing and pure arena-rock attitude in mind. The EVH Nylon Adjustable Guitar Strap delivers the same stylish vibe of all EVH accessories but is now constructed with black nylon for ultimate durability during the most strenuous stage shows. The quick-adjust hook-and-loop fasteners allow players to switch up the sizing of the strap with ease. It also offers extended sizing options (42" - 72"), guaranteeing a comfortable and secure fit for any musician.

The EVH Premium Quality adjustable guitar strap lets you comfortably sling that guitar over your shoulder in big-rock EVH style. Available in 42", which is adjustable to 50" and 56" which is adjustable to 62". Leather hook-and-loop fasteners keep it secured to your guitar.

Our EVH Premium Guitar Picks were hand selected by Eddie from thousands of picks he's used over the years. These nylon picks feature a non-slip grip surface, the classic EVH logo, and a comfortably rounded tip that's just right for shredding. Sold in packs of 12, the picks come in a collectable tin that features the EVH logo and images of Eddie Van Halen's famous Frankenstein guitar.

Slap these sweet-sounding, smooth-feeling babies on your guitar and you better believe you're in for unbelievably great tone. With the EVH name on it, you know you can depend on it.

This EVH® case features a silkscreened logo on the lid, a molded green interior, internal storage compartment, and 3 chrome latches. A perfect fit for your Shark!

With a Dunlop Max-Grip™ molded grip pattern, EVH Signature Series Picks are the perfect solution for fleet-fingered players looking to achieve perfect precision and speed. Each pick features a special non-slip surface, ensuring a firm grip and maximum control for strummers and shredders alike. The picks are available in four classic color combinations as well an expanded selection of gauges (.60mm - 1.0mm), making them well suited to every player's preference.

The Star Gig Bag features durable and stylish design. A water resistant polyester, 600 denier exterior with 20 mm thick premium foam internal padding and a red plush interior to keep your instrument well protected. Features include one large external pocket and includes padded backpack style shoulder straps with a compartment to hide the straps in when they aren't used.

Protect your investment without breaking the bank with this EVH® Star/Shark Economy Gig Bag! It features an EVH® logo on the outside, with plenty of storage space. Back straps included.

Finally, the same strap setup used by Eddie Van Halen is available to everyone! This clasp set works with any EVH® branded strap. It also includes 2 eye hooks to replace your strap buttons. Professional installation is recommended.

Accessories

EVH Wolfgang humbuckers with alnico 2 magnets are hotter and harness Eddie's scorching signature lead tone that captivated the world of rock 'n' roll in the '70s and '80s. These pickups deliver rich harmonics, cutting highs and snarling mids in spades.

EVH Wolfgang humbuckers with alnico 2 magnets are hotter and harness Eddie's scorching signature lead tone that captivated the world of rock 'n' roll in the '70s and '80s. These pickups deliver rich harmonics, cutting highs and snarling mids in spades.

Protect your investment without breaking the bank with this EVH® Wolfgang®/Striped Series Economy Gig Bag! It features an EVH® logo, external storage compartments, top-mount handle and back straps.

Repair and restore your instrument like a professional. The EVH® Work Station features a finish-safe neoprene pad, textured anti-slip bottom grip, and padded neck cradle to hold your guitar at the proper angle for maintenance and adjustment. Crafted from durable EVA foam, the mat rolls up for quick and easy storage or on-the-go routine repairs. Along with offering stable reinforcement during any repair, the neck cradle doubles as a storage compartment and also rolls up for quick and easy storage.

Introducing Ai Ponger - the perfect plugin for those much needed ear breaks. Use either your mouse or your MIDI keyboard's mod-wheel to control the paddle. Completely free and ready to take on any human brave enough to challenge it.

Wall mounting bracket for the Fostex 6301N series and NF04R compact active monitor speakers. Enables angle adjustment of the speaker body and wall mounting; also compatible with the discontinued 6301B-H series. Speakers are sold separately.

Replacement ear pads (pair) for the TH610 and TH616, with low-resilience cushions and soft leather-like artificial leather for a comfortable fit and high sound insulation.

Replacement ear pads (pair) exclusive to the TH900mk2, with protein leather and low-resilience cushioning using egg-derived protein for a comfortable feel.

Replacement ear pads for TH909/TH808 (pair). High-grade earpads with low rebound cushions and carefully selected high-grade synthetic leather, which fit behind the ear without gaps to reduce sound leakage. Exclusive for TH909/TH808.

Optional replacement ear pads for Fostex RP-series headphones (such as the T50RPmk4) designed to improve wearing comfort and deliver smooth, high-quality sound across the bass-to-treble range. The exterior uses Ultrasuede (a registered trademark of Toray Industries, Inc.) for a soft, high-quality texture with excellent durability. Low-rebound cushions of optimized thickness help prevent steaming and fatigue during extended listening sessions, providing premium, fatigue-free wear.

Replacement ear pads for the T60RP, T60RPmk2 and T50RPmk4 Series (pair).

SN04 is a speaker grille designed specifically for use with the NF04R active speaker. It protects the speaker unit placed in front. Uses a high-precision molded plastic frame with a high-strength steel perforated grille, internal cushioning to prevent rattling, and tool-free (screwless) attachment and detachment. Suitable for relay sites, halls, and other audio equipment applications.

A Eurorack module offering two sub-circuits, each with two positive inputs and one negative input, for additive and subtractive mixing of video luma signals.

For audio professionals using Audio-over-IP (AoIP) connectivity, the Genelec 9401A System Management Device enables the smooth integration of Smart Active Monitors and Subwoofers (SAM™) into SAM system layouts, from stereo to immersive, using ST2110, AES67 and Ravenna streams as the source – while offering full support for room adaption from our powerful Genelec Loudspeaker Manager (GLM™) software.

The Genelec GLM Calibration Kit enables Smart Active Monitors and Subwoofers (SAM™) to work with Genelec Loudspeaker Manager (GLM™), our award-winning monitoring calibration and management software offering precise automatic room adaption, advanced system control and highly detailed GRADE Room Acoustic Reporting.

User-replaceable stylus from the Joseph Grado Signature 8MZ cartridge. Compatible with all Grado Prestige Series cartridges.

Consumer replaceable genuine Grado ear cushions, standard equipment for Signature S750 and S550.

Sieveking Sound Omega wood headphone stand in cherry, made in Germany from a single piece of steam-molded wood with a matte lacquer finish.

User-replaceable stylus for the Grado Prestige DJ200i phono cartridge.

Genuine Grado foam ear cushions, standard equipment for SR225, SR325, and Hemp headphones.

Consumer replaceable genuine Grado ear cushions, larger size for enhanced comfort and fit.

User-replaceable stylus for the Grado Prestige Gold3 phono cartridge.

User-replaceable stylus for the Grado Prestige Green3 phono cartridge.

Original manufacturer replacement parts for the Grado GT220 true wireless earbuds and charging case.

Consumer replaceable genuine Grado ear cushions designed for iGrado and eGrado headphones.

Genuine Grado ear cushions, standard equipment for RS1, RS2, and PS500 headphones.

Hard-shell zipper case with embossed Grado logo

User-replaceable stylus from the Joseph Grado Signature MCZ cartridge. An upgrade from the 8MZ stylus and compatible with all Grado Prestige Series cartridges.

Hard-shell zipper case with embossed Grado logo for protecting Grado headphones

User-replaceable stylus for the Grado Prestige Mono ME+ (4E-MEPC) phono cartridge.

User-replaceable stylus for the Grado Prestige Red3 phono cartridge.

User-replaceable stylus from the Joseph Grado Signature XTZ cartridge. An upgrade from the TLZ stylus and compatible with all Grado Prestige Series cartridges.

Consumer replaceable genuine Grado ear cushions compatible with SR60, SR80, SR125 and all Prestige, Reference, Statement, Professional and Limited Edition Headphones.

A crush-proof clamshell case for in-ear headphones with pocket-sized portability and secure protection.

User-replaceable stylus from the Joseph Grado Signature TLZ cartridge. An upgrade from the MCZ stylus and compatible with all Grado Prestige Series cartridges.

Standard equipment on the GW100. These cushions only fit the GW100.

Sieveking Sound Omega wood headphone stand in walnut, made from real wood with a sturdy design that protects and displays headphones.

Hand-crafted solid wood storage box for Grado headphones with golden oak stain, clear satin lacquer finish, and dovetail joinery.

Sieveking Sound Omega wood headphone stand in zebrano, made from real wood with a sumptuous finish that protects and displays headphones.

A fully assembled power expansion board that adds a regulated +5V rail to Eurorack systems by converting +12V, installed directly into the power bus.

A PCB-only DIY board that regulates +12V down to +5V and distributes it to the Eurorack power bus, without included components.

A set of five 9mm vertical PCB mount B100K linear potentiometers for DIY synth and Eurorack builds.

A replica of the classic Davies 1900H potentiometer knob with a brass insert and hexagonal screw, compatible with 6.0mm and 6.35mm shafts.

A switched 3.5mm mono jack socket for PCB mounting, used in DIY audio and modular synthesizer builds.

A cleaning solution formulated to remove dirt and grease from fretboards while conditioning and restoring moisture, leaving the wood smooth to the touch.

A polish spray for guitars intended for everyday use, safe on hardware and all finishes including nitrocellulose lacquer.

A larger bottle of guitar polish for everyday use, safe on hardware and all finishes including nitrocellulose lacquer, intended for heavier usage in workshops and stores.

A set of phosphor bronze wound acoustic guitar strings with a steel core, offering balanced tone and excellent intonation in an extra light 10-47 gauge.

A set of phosphor bronze wound acoustic guitar strings with a steel core, offering balanced tone and excellent intonation in a custom light 11-52 gauge.

A set of phosphor bronze wound acoustic guitar strings with a steel core, offering balanced tone and excellent intonation in a light 12-53 gauge.

A set of nickel-plated steel wound electric guitar strings with a steel core, providing a bright and balanced tone in a light 9-42 gauge.

A set of nickel-plated steel wound electric guitar strings with a steel core, providing a bright and balanced tone in the standard 10-46 gauge.

Official perforated velour replacement earpads for the HEDDphone D1, sold as a pair.

Official faux leather replacement earpads for the HEDDphone, sold as a pair.

Official faux leather replacement earpads and head cushion for the HEDDphone TWO, sold as a matched pair.

Official replacement earpads for the HEDDphone TWO GT, sold in pairs and available in velour or lamb leather.

A 3D-printed custom fader cap designed to fit 4mm x 1.2mm fader levers for improved grip and control.

Gold-plated brass dress nuts designed to fit 3.5mm jack sockets on Eurorack module panels for a matching black and gold aesthetic.

The Optika VCA is a dual optical VCA built with handmade vactrols, offering a non-linear, characterful sound that can be pushed into overdrive for added harmonics.

MegaMini from HiFiMAN.

SuperMini from HiFiMAN.

DIY and Space Reserve Aluminum blanks for Intellijel 1U spaces. A great starting point for DIY purposes, drill or mill them to fit your own custom circuits or maybe you're just trying to keep the dust out of your case.

Discontinued

Stacked. You've filled up your Intellijel 4U case, but you still have the bug to expand your rack. Grab a 2nd or 3rd 4U case, a set of these joiners and double or triple your space.

Replacement AC/DC power adapter bricks for Intellijel cases and power supplies, available in 40W, 60W, and 90W versions.

An alternative modern look for Cascadia, a pair of aluminum side cheeks with mounting screws. (Cascadia not included)

Great for cables, power bricks, portable recorders.

The Transporter High quality and durable padded gig bags for transporting your precious modular synth cargo—don't worry, there is enough head room to leave your system patched. 104HP size shown. Bag+Lid Bundle Available →

The Transporter High quality and durable padded gig bags for transporting your precious modular synth cargo—don't worry, there is enough head room to leave your system patched. 104HP size shown.

High quality and durable padded gig bag sized specifically for Cascadia, with enough head room to leave your system patched.

Transparent polycarbonate lid for the Palette case. Keep your Palette patched and dust free.

Polycarbonate Protection Transparent polycarbonate lid for the Cascadia. Keep your synth patched and dust free. Bag+Lid Bundle Available →

A pouch to hide the mess and tuck away the small items you have scattered around your studio.

A DC barrel jack and power switch for connecting power to the TPS30 or TPS80 powered busboards.

A couple of tins (medium/large) for your screws, adaptors, herb or spices.

For use with the official Intellijel Firmware Updater app. It's required to update firmware on Plog, Metropolis, Mutamix, µScale, and µStep.

A portable vocal booth offering 360-degree studio acoustics that lets users record or practice vocals professionally without disrupting neighbors, eliminating the need to soundproof a room.

A portable vocal booth that provides 360-degree studio acoustics, letting users record or practice vocals without disturbing neighbors.

A portable vocal booth that provides 360-degree studio acoustics, letting users record or practice vocals without disturbing neighbors.

A portable vocal booth that provides 360-degree studio acoustics, letting users record or practice vocals without disturbing neighbors.

A compact, ultra-portable vocal recording booth that fits in a carry bag, delivering a dry, clear sound with a smooth frequency response by removing room sound from voice recordings.

A premium, fully portable isolation booth engineered for musicians, vocalists and producers, combining precision-tuned acoustics with a modular construction that assembles quickly without permanent installation.

The flagship portable vocal booth featuring patent-pending Acoustic Gills that isolate vocals from room acoustics and low-frequency buildup, with 20% more internal space and a silent ventilation system developed with Noctua.

A universal holder for phones, tablets and notepads that mounts to the ISOVOX 2, adjustable to fit screens up to 14 inches at a comfortable eye height.

The SP 5211 is a classic tripod speaker stand made of lightweight aluminium tubing with powder coating, holding up to 50 kg and adjusting from 106 cm to 192 cm.

The SP 5211 is a classic tripod speaker stand made of lightweight aluminium tubing with powder coating, holding up to 50 kg and adjusting from 106 cm to 192 cm.

A round base plate that the pole attaches to, required for the Pro Round Base Stand.

A round base plate that the pole attaches to, required for the Pro Round Base Stand.

A pole that attaches to the round base stand.

A pole that attaches to the round base stand.

A rugged speaker stand with a smaller footprint than tripods, featuring a 35 mm rod with a steel sleeve and adjustable from 1.05 to 1.8 m. It includes an additional weight disc for extra stability, weighing 17.1 kg total with the base.

A rugged speaker stand with a smaller footprint than tripods, featuring a 35 mm rod with a steel sleeve and adjustable from 1.05 to 1.8 m. It includes an additional weight disc for extra stability, weighing 17.1 kg total with the base.

A hard shell travel case specially made to fit the ISOVOX 2, with wheels, an extension handle, and pockets for the mic pole, mic mount, LED light, and cables.

A premium-level storage solution for two JZ Microphones models and two accessories.

A premium-level storage solution for one JZ Microphones model and one accessory.

Wall mounting bracket for LSX II speakers with integrated cable management, 40° downward tilt, and 90° sideways rotation. Sold as a pair.

Wall mounting bracket for KEF Q3 Meta and Q1 Meta speakers enabling near-flush mounting. Screws directly onto the rear of the speaker; includes a rubber protective bar. Sold as a pair.

Remote control for LS Wireless Speakers featuring an aluminium top plate with backlit buttons and a customizable Favourite button. Operates via InfraRed technology without requiring speaker pairing.

Black cloth grille with magnetic fixings for compatible Ci-Reference and Ci-R Series in-wall speakers. Available in two sizes to cover Ci-Reference (Ci3160/Ci5160REFM) or Ci-R Series models.

Passive transformer that merges left and right stereo channels from an amplifier into a single speaker feed. Designed for rooms where only one speaker can be installed.

Aluminium stacking kit that allows up to three KC92 subwoofers to be merged into a single vertical unit via threaded inserts. Increases maximum output without additional floor space.

The KW1 comprises a wireless transmitter and receiver enabling cable-free audio transmission to KEF subwoofers. Allows KEF subs to be optimally placed without cable constraints. Compatible with Kube, KC62, and KC92 subwoofers, as well as LSX II LT, LSX II, LS50 Wireless II, and LS60 Wireless speakers.

A wireless adapter that receives signals from the XIO Soundbar and transmits them to subwoofers, connecting to KEF subwoofers via proprietary pins or to third-party subwoofers through Aux/Optical outputs. Enables flexible subwoofer placement without cable constraints.

Hard-shell carrying case for the Mu7 headphones. Protects the headphones during travel and storage.

Leatherette memory foam replacement ear cushions for the Mu7 headphones. Conforms to head shape to enhance passive and active noise cancellation and improve bass response.

Die-cast aluminum desk pad designed for use with LSX II or LSX II LT speakers as a desktop loudspeaker stand. Features a 10-degree upward tilt to angle speakers toward the listening position. Compatible with 1/4" screw mounting. Sold as a pair.

Spike kit engineered to offer superb cabinet rigidity and stability, enabling optimal positioning of floorstanding Q Series speakers. Enhances vibration isolation and reduces resonance to improve sound quality, with adjustable elements for easy leveling.

A neat black cloth grille to cover the drive units on KEF Q Series loudspeakers. Features magnetic fixings for simple attachment and removal, offering a clean appearance while concealing speaker drivers. Available for Q150, Q350, Q550, Q650c, Q750, and Q950 models.

Magnetic grilles for KEF Reference Series speakers, with individual dedicated grilles for each driver. Available for Reference 1, 2c, 3, 4c, and 5 models in black cloth.

Dedicated floor stand for the Reference 1 Meta speakers with integrated cable management. Sold as a pair.

Floor stand for LSX II and LSX II LT wireless speakers with integrated cable management and a fillable aluminium pillar. Adjustable feet and 1/4" screw mounting; sold as a pair.

Floor stand for KEF LS50 Meta and LS50 Wireless II with a fillable aluminium tube structure, steel plate base, and integrated cable management. Sold as a pair.

Aluminum floor stand engineered for the R3 Meta bookshelf speakers, with integrated cable management and a fillable design for enhanced stability. Sold as a pair in three finishes.

Floor stand designed for KEF's Coda W and Q Series speakers, featuring aluminum construction for rigidity and integrated cable management. Can be filled with inert material for enhanced stability and optimal speaker positioning.

Metal rear enclosures (back boxes) for KEF Ci in-wall and in-ceiling speakers. Provides a sealed enclosure and reduces sound transmission to adjacent rooms during new construction installation.

Steel rough-in frames (new construction brackets) for KEF Ci in-wall and in-ceiling speakers. Allow contractors to reserve space and simplify cutting during pre-wiring; 13 models covering square, round, and rectangular cutouts. Sold per pair.

An elegantly designed floor stand engineered for T Series satellite speakers. Features the Selecta-mount system that automatically balances positioning while adjusting bass output based on placement without sacrificing audio fidelity. Internally wired design. Sold as a pair.

The MP-BTA In-Ear Monitor Adapter enhances your monitoring system. This adapter offers Bluetooth capability, precise sound deliverance, and comfort.

Combining decades of innovative, award-winning disc-player design with refined, modern mastery, the CD 70 is engineered for the contemporary music collector.

Wall Fixture for the Marantz Grand Horizon Wireless Speaker

Wall fixture for the Marantz Horizon Wireless Speaker. Designed to elevate luxury, the Horizon Wall Mount expands the ways you can enjoy your Marantz Horizon listening experience, securely mounting your wireless speaker while keeping the look elegant and discreet.

SACD 30n was designed for the experienced audiophile who appreciates flexibility in format and expects the most realistic sound. Hundreds of hours of careful Sound Master tuning ensure the exquisite detail and musicality Marantz has always delivered.

A pedalboard mounting tape that uses rows of tiny mushroom-shaped posts to form a stronger bond than traditional hook-and-loop fasteners, sold as a 1-meter roll.

A pedalboard mounting tape that uses rows of tiny mushroom-shaped posts to form a stronger bond than traditional hook-and-loop fasteners, sold as a 10-meter roll.

A pedalboard mounting tape that uses rows of tiny mushroom-shaped posts to form a stronger bond than traditional hook-and-loop fasteners, sold as a 5-meter roll.

DLIO-BP is a blanking plate for use with the I/O expansion slots in Midas PRO3, PRO6, PRO9 and PRO X digital console control centres and DL351 and DL451 modular I/O stage boxes. It covers unused card slot positions and shares the same front panel form factor as DL441, DL442, DL443, DL444, and DL452 I/O cards.

Mounting Bracket for Midas DP48 Personal Monitoring Mixer. Bracket designed to mount the DP48 Personal Monitor Mixer on mic stands, music stands, drum hardware, or similar surfaces. Features dual headphone hangers and integrated cable guide.

PRO SERIES PRO FADER (200 mm). Not satisfied with the existing motorised fader choices in the marketplace, Midas created the PRO FADER, rated for up to a million cycles - replacement motorised fader for use in Midas PRO Series consoles.

Not satisfied with the existing motorised fader choices in the marketplace, Midas created the PRO FADER, rated for up to a million cycles – three times that of other leading manufacturers - and providing high linearity, robustness, and smooth feel during operation. This decision yielded many other benefits, including total quality control over the manufacturing process and lower costs that could be passed on to customers. As a digital console manufacturer, Midas has a perspective on the actual application of motor faders that a component manufacturer would not have. The multi-disciplinary development project combined mechanical design, electronic hardware and software optimisation with a rigorous testing programme and an investment in material science to produce the best possible performance in actual operation in Midas PRO Series consoles. Semi-precious metals are used for the wiper fingers for their hard-wearing properties, and precision resistive tracks were created that offer highly linear positional accuracy, coupled with long-term durability and even response in use. PRO FADER (550 mm) features a high precision 100 mm travel track with a 10 kΩ linear law, ideally suited to servo control applications. The integrated touch sensing track and conductive T-Bar allow both the implementation of automatic channel selection in software, as well as detection of when the fader is being held so that the motor is not driven. PRO FADER (550 mm) is designed to be mounted to console fascia panels via its two M3 threaded pillars which are on 120 mm mounting centres. A 550 mm long cable is provided which includes connections for the 10 kΩ resistive track, the touch sensing track and the motor. PRO FADER (550 mm) is supplied as a set of five faders and is specifically intended for use in the centre sections of Midas PRO3, PRO6, PRO9 and PRO X Series control centres. PRO FADER (550 mm) is also a replacement for industry standard parts such as Penny+Giles PGFM3200, Alps K-Fader and other similar 100 mm motorised faders.

PRO LCD SWITCH enables dynamic and context-sensitive user interfaces, providing clear visual feedback of assigned functions and user-created labelling of mixing console channel, bus and group selections. The high contrast FSTN LCD glass with 36 x 24 pixel resolution allows immediate at-a-glance indication over a very wide viewing angle, and the tactile response of the momentary switch action provides confidence that the switch has been pressed, essential when the mix engineer's eyes are on the stage, not the console. PRO LCD SWITCH provides the key user interface functionality for the Midas console VCA and POPulation group navigation system, which mirrors the natural workflows used by mix engineers. The RGB LED backlight offers high visibility in all lighting conditions, and the colour coding offered by the 8 distinct displayable LED colours encourages the development of a mental picture, or “Mind Map”, of the whole console system. The flexibility of PRO LCD SWITCH ensures only the required control elements and associated visual feedback are presented, allowing users to adopt structured task-based workflows. PRO LCD SWITCH is suitable for use in all Midas XL8 and PRO SERIES digital consoles and control centres, including as a replacement for the Screenkeys RGB24T LCD switch.

Touring grade road case for the Midas PRO3, PRO6, PRO9 and PRO X Live Digital Console control centres, designed to withstand the rigours of live concert tours. Constructed from 12 mm thick rigid marine grade plywood with 40 x 40 mm durable aluminium edging extrusions. Dual load-bearing spigots couple the weight of the console chassis directly into the road case, and composite density foam provides internal support and superior protection in transit. Features premium Penn-Elcom castors and RK handles, and ships with a removable protective pallet that allows the road case to be stored and shipped on its side.

A tube microphone power supply designed for the CV4 and CV3 tube microphones.

An XY stereo mounting bar used to mount two microphones for XY stereo recording.

An output transformer replacement part for the C1, C7e and CV3 microphones.

A custom padded gig bag sized to fit The Amp along with its power cable and small accessories, featuring a soft rubber handle and removable clip-on shoulder strap.

Custom high-temperature silicone rings that fit over preamp and power tubes to prevent microphonic tube rattle caused by speaker vibration.

The Block Case 2.0 is a protective carrying case compatible with all Block Series amplifiers, featuring styrofoam inserts and reinforced cording.

This is a replacement handle for Quilter BlockDock and Aviator Cub/Cub UK amplifiers.

This is a replacement badge that originally came on BlockDock Series speaker extension cabinets, measuring 1 1/4" by 4 1/4".

This is a replacement handle in black simulated leather for select Quilter amplifiers including Steelaire, Aviator, and MicroPro Mach 2 Series units.

This is a replacement handle in brown leather look for the original MicroPro Gen 1 Series amplifiers.

This is a replacement retention plate for the BlockDock 12HD, BlockDock 12CB, or BlockDock 10TC speaker cabinets.

Discontinued

Tabletop CD player with a large 130mm interactive pitch wheel, 100mm pitch slider, 10-second anti-shock buffering, and S/PDIF digital output.

Discontinued

Tabletop CD player with two seamless loop points, three hot stutter starts, tap-in BPM counter, anti-shock, fader/remote start, and S/PDIF digital output.

Discontinued

Tabletop CD player with a 130mm scratch jog wheel, DSP effects, pitch control with key lock, seamless looping, and a built-in Beatkeeper for beat-synced DJ performance.

Professional tabletop CD player with a touch-sensitive scratch and effects wheel, multiple simultaneous DSP effects, 3,000 cue-point storage, key lock, and a built-in Beatkeeper.

Custom protective case for the CDMIX series of mobile DJ systems, featuring a sturdy carry handle, a removable lid for performance while in the case, and locking latches for security.

Discontinued

CDN77USB Professional Dual USB and MP3 CD player

The CS-1 Professional DJ Cartridge is designed and optimized for dance music, with true full-range frequency response, a fine tip circular diamond stylus, and high output for serious dance club and mobile DJs.

Discontinued

Official Serato DJ three-screen display with a 4.3-inch full-color center screen that shows waveforms and library navigation, compatible with over 40 Serato DJ control systems including DVS.

GrooveTool RS Replacement Stylus for GrooveTool Cartridge.

Collapsible, wall-mountable laptop performance stand for DJs and producers, with rubber grips for secure placement and a zippered carrying case for transport.

Discontinued

Hard case for the Mixdeck Express, with rugged nickel-plated latches and reinforced corners for maximum protection between gigs.

Protective case for Numark Mixtrack series DJ controllers. Clamshell design with a padded, foam-lined interior and a slot for headphones and cables.

Professional USB and MP3 CD player.

Coffin-style heavy-duty flight case built for the NS7 and NS7II controllers, with metal reinforcement, foam padding, wheels, a handle, and removable panels for performing with the unit in the case.

Three-screen display add-on that upgrades the NS7II controller with three 4.3-inch full-color screens for real-time Serato DJ waveform and library feedback, matching the NS7III.

Laptop Performance Stand for NS7II.

Coffin-style, heavy-duty flight case designed specifically for the NS7III, the Numark performance controller for Serato DJ software.

A replacement headband assembly for S4X and S4R headphones including the stainless steel headband, rotators, screws, bolts, and washers.

A replacement headband assembly for S5X headphones including the stainless steel headband, rotators, screws, bolts, and washers.

Replacement inner acoustics parts for S4R headphones, including back covers, acoustic foam, meshes, and acoustic cylinders.

Replacement inner acoustics parts for S4X headphones, including back covers, acoustic foam, meshes, and acoustic cylinders.

A pair of individually matched replacement speaker drivers for S4X 1.0/1.1 and S4R 1.0/1.1 headphones.

A pair of individually matched replacement speaker drivers for S5X headphones.

A replacement headband assembly for S4 and S4R 2018 headphones, including all bolts and nuts needed for installation.

A speaker protection insert for R1 headphones.

Replacement wooden earcup bodies for S4, S4R, and S4X headphones.

Wooden earcups replacement part for R1 headphones.

Wooden earcups replacement part for S5X headphones.

Wooden earcups replacement part for X1 headphones.

A set of 40 metal M3 thumb screws for mounting Eurorack modules without a screwdriver, packaged in a tin.

An ultra-lightweight power supply that converts power from a USB-C mobile power bank into twelve 9V DC outlets for pedalboards.

A large-capacity, noise-filtered 9V DC power adapter designed for powering effects pedals, providing up to 2000mA of clean current.

A footswitch designed to connect directly to BJF-S series amplifiers for controlling effect loops and channel switching, with three status LEDs and no separate power needed.

A small acrylic pedalboard with handle holes, sized to hold about 2 to 3 effects pedals.

A small acrylic pedalboard with handle holes, sized to hold about 3 to 5 effects pedals and 3 foot switches.

Discontinued

A USB-powered pedalboard power supply providing 10 center-negative 9V DC outputs, allowing portable powering from a USB adapter or battery bank.

A power supply designed to power pedalboards from a USB-C mobile battery, providing ten 9V DC outlets with current usage indicators.

A fully isolated compact power supply with ten DC outputs of varying current ratings, including four 500mA and four 80mA terminals, plus an adjustable SAG voltage terminal.

A 16 by 12 inch non-slip silicone mat that keeps effects pedals and gear secure on a floor or desk without needing a pedalboard or hardware.

A power adapter designed for BJF-S series amplifiers.

A set of 3 replacement footswitches compatible with the One Control Crocodile Tail Loop OC10, Chamaeleo Tail Loop MkII, and Basilisk.

An 18V center-negative DC power adapter rated 1000mA with a 2.1mm barrel plug, built-in noise filter, and 100-240V AC universal input for worldwide use.

A dedicated 18VDC 1000mA center-minus power adapter designed for specific One Control effects pedals, featuring a noise filter for clean and stable power.

A compact aluminum alloy pedalboard with integrated cable passthroughs for clean routing and space to mount a power supply underneath. It holds 3 to 6 compact pedals and includes rubber feet and hook-and-loop fasteners.

The Revival Footswitch gives you access to two hidden features of the RevivalDRIVE line, letting you switch in the Mid Boost and Blend Override functions on the fly while on stage.

Using the Switcher Interface it is possible to remotely toggle the active Channel, Bypass state, Mid Engage, and Blend Override functions of the RevivalDRIVE, allowing instant recall of presets with different combinations of Channels, Mid Boosts, Blended Overdrive, or bypass.

A 9mm wide, 25mm tall trimmer potentiometer commonly used in Eurorack DIY builds, rated at 100K with a B taper.

A replacement front panel for the KPG Eurorack module.

24-pack (12 matched sets) of 1.25" black 3M Dual Lock fastener coins for mounting pedals to a pedalboard.

Purchase a Pedaltrain Classic 1 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included.

Purchase a Pedaltrain Classic 2 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included.

Purchase a Pedaltrain Classic 3 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included.

Purchase a Pedaltrain Classic Jr pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included.

Purchase a Pedaltrain Classic PRO pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included.

Pedaltrain Deluxe MX Soft Case for Classic 1 & PT-1 If you have a newer Classic 1, or the original PT-1 model, this is your case. This model has been a best-seller around the world for 20 years. If it's time to upgrade your soft case this is a perfect fit for your rig.

Pedaltrain Deluxe MX Soft Case for Classic 2 & PT-2 You have discerning taste, and an eye for quality. We like that about you. Your Classic 2 or, perhaps, your vintage PT-2, has been around the world more times than you can count. Reliable.

Pedaltrain Deluxe MX Soft Case for Classic 3 & PT-3 If you have a Pedaltrain Classic 3 or PT-3 we have a case purpose-built for you. Upgrade your soft case with this gem. We built it with 6" sidewalls so you have some extra headroom in there for tall stuff.

Pedaltrain Deluxe MX Soft Case for Classic Jr & PT-JR The Pedaltrain Classic Jr is just like you, adorable and popular. No reason to be bashful about it. This case is a perfect upgrade for the new version, or the original PT-JR.

Pedaltrain Deluxe MX Soft Case for Classic Pro, PT-PRO, PRO FX & Novo 32 This case is a perfect replacement or upgrade for your Pedaltrain Pro, Novo 32, or Pro FX. A big rig like that needs a big case, and a big case certainly needs a big pocket. These are facts, we don't dispute this.

Pedaltrain Deluxe MX Soft Case for JR MAX You have a Pedaltrain Jr Max and want to a new case? We got you. This case is perfect. There is a zippered accessory pouch for your cables, devices, or whatever you want to take with you on your journey.

Pedaltrain Deluxe MX Soft Case for Metro 16 Metro 16 folks are very specific types. Organized, focused, minimalists. This case fits your Metro 16 perfectly. There is a zippered accessory pouch to securely travel with your well-planned and organized do-dads too.

Pedaltrain Deluxe MX Soft Case for Metro 20 & Mini Maybe you are OG Pedaltrain and have the original "Mini" or you are the person who said the Pedaltrain Metro 20 was perfect for your rig. This case works great for both models.

Pedaltrain Deluxe MX Soft Case for Metro 24 You've taken your Pedaltrain Metro 24 to every rehearsal and gig for years, and it has served you well. Now it's time to refresh your case. Well, we have a good one for you. Check out the zippered accessory pouch, which will hold your stuff securely.

Pedaltrain Deluxe MX Soft Case for Metro MAX Metro Max is coming back by popular demand. Arrival Summer 2024. You push things to the max, which is why you have a Pedaltrain Metro Max. We have a case for you, too. There's a roomy pocket on the front, so you can take some stuff with you to the gig.

Pedaltrain Deluxe MX Soft Case for Nano We know your type. Less is more. Can't disagree, honestly. But you must admit a nice shoulder strap and accessory pouch is handy, yes? This case fits a Pedaltrain Nano perfectly. Durable construction, quality components, padded strap, and a great price.

Pedaltrain Deluxe MX Soft Case for Nano MAX This case fits a Pedaltrain Nano Max perfectly. We added an accessory pouch that runs the length of the case. Why not? Durable construction, quality components, padded strap, and a great price.

Pedaltrain Deluxe MX Soft Case for Nano+ You travel light, unencumbered by life's burdens - and heavy gear. We made this for you. This case is a perfect fit for your Pedaltrain Nano+. We added a little accessory pouch for some extras, in case you wanted to take a little more than usual.

Pedaltrain Deluxe MX Soft Case for Novo 18 Have a Pedaltrain Novo 18 and need a case? We have you covered. This is a perfect fit. Durable construction, quality components, extra depth for taller pedals, padded strap, a roomy storage pouch for your extras, and a great price.

Pedaltrain Deluxe MX Soft Case for Novo 24 Need to replace or upgrade your Pedaltrain Novo 24 soft case? This is the one you want. Durable construction, quality components, extra depth for taller pedals, padded strap, a roomy storage pouch for your lunch, and a great price.

Pedaltrain Deluxe MX Soft Case for Novo 32 This case is a perfect replacement or upgrade for your Novo 32. A big rig like that needs a big case, and a big case certainly needs a big pocket. These are facts, we don't dispute this.

Pedaltrain Deluxe MX Soft Case for Terra 42 You have a Pedaltrain Terra which says a lot about you. Namely, that you have a lot of pedals. You are in the upper echelon of pedal addicts, and we salute you! We made a case worthy of your pursuit.

Deluxe soft case with shoulder strap sized for the Pedaltrain XD-18, with water-resistant exterior and easy-wipe interior.

Deluxe soft case with shoulder strap sized for the Pedaltrain XD-24, with water-resistant exterior and easy-wipe interior.

Ultra-lightweight hard case sized for the Pedaltrain Metro 16.

Ultra-lightweight hard case sized for the Pedaltrain Metro 20.

Ultra-lightweight hard case sized for the Pedaltrain Metro 24.

10 feet each of hook-and-loop fastener (both sides) for mounting pedals to a pedalboard, from Pedaltrain's charity-tied HOOK LOOP LOVE line.

Purchase a Pedaltrain JR MAX pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-JMAX-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Metro 16 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-M16-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Metro 20 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-M20-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Metro 24 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-M24-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Metro Max pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included.

Purchase a Pedaltrain Nano pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-NANO-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Nano MAX pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included.

Purchase a Pedaltrain Nano+ pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-NPL-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Novo 18 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-N18-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Novo 24 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-N24-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain Novo 32 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-N32-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

10 feet each of hook and loop fastener material, for attaching pedals to a Pedaltrain pedalboard.

A single pedal-riser wedge that lifts a short pedal's footswitch up to a full inch for easier access on a crowded pedalboard.

Purchase a Pedaltrain Terra 42 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-TER-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Professional-grade Replacement Tour Case for Pedaltrain Classic 1 and Pedaltrain PT-1, engineered to be up to 35% lighter than previous models. Case is designed to accommodate unmodified Pedaltrain pedal boards.

Professional-grade Replacement Tour Case for Pedaltrain Classic 2, Pedaltrain Novo 24, Pedaltrain PT-FLY, and Pedaltrain PT-2, engineered to be up to 35% lighter than previous models. This case accommodates several board sizes (Classic 2, Novo 24, PT-FLY, PT-2).

Professional-grade Replacement Tour Case for Pedaltrain Classic JR, Pedaltrain Novo 18, and Pedaltrain PT-JR, engineered to be up to 35% lighter than previous models. This case accommodates several board sizes (Classic JR, Novo 18, PT-JR).

Professional-grade Replacement Tour Case for Pedaltrain Metro 16 and Nano (roomy fit on Nano) engineered to be up to 35% lighter than previous models. Case is designed to accommodate unmodified Pedaltrain pedal boards.

Professional-grade Replacement Tour Case for Pedaltrain Metro 20, Pedaltrain Mini, and Nano+ (roomy fit on Nano+), engineered to be up to 35% lighter than previous models. This case accommodates both the Metro 20 and PT-Mini.

Professional-grade Replacement Tour Case for Pedaltrain Metro 24, engineered to be up to 35% lighter than previous models. Case is designed to accommodate unmodified Pedaltrain pedal boards.

Professional-grade tour case sized for the Pedaltrain JR MAX, with ATA-approved ball corners and rubberized foam lining.

Professional tour case sized for the Pedaltrain XD-18, with ATA-approved ball corners and rubberized foam lining.

Professional tour case sized for the Pedaltrain XD-24, with ATA-approved ball corners and rubberized foam lining.

Professional-grade Replacement Tour Case with Wheels for Pedaltrain Classic PRO, Pedaltrain Novo 32, and Pedaltrain PT-PRO, engineered to be up to 35% lighter than previous models. This case accommodates several board sizes (Classic PRO, Novo 32, PT-PRO).

Professional-grade Replacement Tour Case for Pedaltrain Terra 42. Case is designed to accommodate unmodified Pedaltrain pedal boards. Modifications like large raised feet, large handles, protruding in/out panels, and various custom accessories may not fit in the case.

Replacement tour case with wheels sized for the Pedaltrain Classic 3, with ATA-approved ball corners and rubberized foam lining.

Universal mounting bracket kit for mounting power supplies and other accessories underneath Classic-series boards.

Universal mounting bracket kit for mounting power supplies and other accessories underneath Novo, Terra, and XD series boards.

Mounting kit for attaching a Voodoo Lab power supply underneath a Pedaltrain Novo, Classic, XD, or Terra series board.

Purchase a Pedaltrain XD-18 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-XD18-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.

Purchase a Pedaltrain XD-24 pedal board with generous rolls of hook and loop and zip ties. Perfect for your studio or at-home practice room. Please note, no case is included. Included: Model: PT-XD24-F Pedaltrain pedal boards are rock solid, virtually indestructible, and built to last a lifetime.