Echo Fix

A splicing block for cutting and joining 1/4" tape echo tape and mastering tape.

A kit containing two replacement tape loops and a set of self-adhesive replacement felts for the Roland Space Echo series.

A pair of replacement tape loops for the Ace Tone EC-10 tape echo.

A pair of replacement tape loops for the Ace Tone EC-20 tape echo.

A replacement capstan motor for The Plex Tube Echo Chamber, offered as a user-replaceable part.

A pair of replacement tape loops for Copicat solid state tape echo units.

A pair of 51cm replacement tape loops for the Dynacord Echocord Mini tape echo.

A pair of 51cm replacement tape loops for the Dynacord S65 tape echo.

A replacement tape feed bearing for the Echo Fix EF-X2, EF-X3 and EF-X3R tape echo units.

A replacement power supply for the Echo Fix EF-X2, EF-X3 and EF-X3R, rated 100-240V AC input with 24V DC 2 amp centre-positive output.

A brand new replacement playback head for Echoplex EP1, EP2, EP3 and EP4 tape echo units.

A brand new replacement record/erase head for Echoplex EP1 and EP2 tape echo units.

A pack of five precision made tension spring arms for the Echoplex EP1, EP2, EP3 and EP4 and Fulltone TTE/SSTE tape echos, used as part of regular servicing.

A pair of replacement tape loops for the Echo Fix EF-X2, EF-X3 and EF-X3R tape echos.

A pair of replacement tape loops for HH tape echo units with a rich tone and high echo output.

A pair of replacement tape loops for the Klemt Echolette NG51 tape echo.

A pair of replacement tape loops for the Korg Stage Echo SE-300 and SE-500 tape echo units, matching the original tape type.

A pair of replacement tape loops for the Mirano 3R-S tape echo.

A pair of replacement Hall effect ICs for Roland Space Echo motors branded Pioneer and Nidec.

A rebuild kit for Roland Space Echo motors that includes bearings, Hall effect ICs, motor shaft oil and bush grease to fix excessive wow and flutter or starting issues.

An improved pinch roller with low friction bearings for Roland Space Echo units, manufactured to original specifications to replace deteriorated rubber rollers.

A custom replacement oscillator coil for RE-201, RE-101, RE-150, RE-301, RE-501 & SRE-555 tape echoes. It requires slight modification to install due to a different pin footprint.

A pair of replacement case latches for Roland Space Echo models RE-201, RE-101, RE-150, RE-301 and RE-501.

A replacement pinch roller arm solenoid to suit Space Echo Models RE-101, RE-201, RE-301, RE-501 and SRE-555.

A replacement power switch for the RE-501 & SRE-555 tape echoes.

A 110-120 Volt AC replacement power transformer for the Roland RE-150, RE-301, RE-501 & SRE-555, allowing conversion from a Japanese 100v or 220v transformer for use on 110-120v power systems.

A 220-240 Volt AC replacement power transformer for the Roland RE-150, RE-301, RE-501 & SRE-555, allowing conversion from a Japanese 100v or USA 110v transformer for use on 240v power systems.

A re-printed and laminated replacement lid instruction card for the RE-201, providing English instructions in place of the original Japanese lid card.

A re-printed and laminated replacement lid instruction card for the RE-301, providing English instructions in place of the original Japanese lid card.

A complete service kit for the Roland Space Echo RE-501 and SRE-555, including tape loops, tension spring, felt set, tape feed bearings and an improved green pinch roller.

A re-printed and laminated replacement lid instruction card for the RE-501, providing English instructions in place of the original Japanese lid card.

A kit of electrolytic capacitors for re-capping the Roland RE-201 and RE-101, supplying the values needed to suit all PCB revisions used during production.

A 120 Volt AC replacement power transformer for the Roland RE-201 and RE-101, allowing conversion from a Japanese 100v or 240v transformer for use on 120v power systems.

A 220-240 Volt AC replacement power transformer for the Roland RE-201 and RE-101, allowing conversion from a Japanese 100v or USA 110v transformer for use on 240v power systems.

A kit of electrolytic capacitors for re-capping the Roland RE-301, supplying the values needed to suit all PCB revisions used during production.

A kit of electrolytic capacitors for re-capping the Roland RE-501 and SRE-555, supplying the values needed to suit all PCB revisions used during production.

A pair of replacement cabinet lid screws for the Roland RE-501.

A replacement roller arm assembly for Roland Space Echo models.

Two replacement tape loops for Roland Space Echo units, made with high quality tape for rich tone and reliable self oscillation.

A set of four larger rubber feet for Roland Space Echo models RE-201, RE-101, RE-150, RE-301 and RE-501.

A set of four smaller rubber feet for Roland Space Echo models RE-201, RE-101, RE-150, RE-301 and RE-501.

A replacement sealed upper motor bearing for Roland Space Echo units, addressing wear that causes excessive wow and flutter and can burn out the motor.

A replacement solenoid eye bolt for Roland Space Echo models.

A set of 7 replacement screws that attach the wooden cabinet to the metal chassis of Roland Space Echo units, including RE-101, RE-150, RE-201, RE-301, RE-501, RE-100 & RE-200, custom made to original spec.

A replacement motor mount spacer for Roland Space Echo models.

A drop-in replacement brushless DC motor for Roland Space Echo units that originally used Pioneer or Nidec motors, supplied with a cable loom requiring no soldering.

A set of replacement self-adhesive felts for the tape path of the Roland Space Echo series.

A 100 metre roll of 1/4-inch splicing tape used for making or repairing tape echo loops.

A pack of five stainless steel replacement thumb nuts for the tape bay of Roland Space Echo models and Echo Fix EF-X2 and EF-X3.

A stainless steel replacement thumb nut for the tape bay of Roland Space Echo models RE-101, RE-150, RE-201, RE-301, RE-501 and SRE-555.

A 19mm diameter tape feed bearing replacement for Roland Space Echo units, essential to reduce wow and flutter.

A 22mm diameter tape feed bearing replacement for Roland Space Echo units, essential to reduce wow and flutter.

A replacement tape tension spring for Roland Space Echo units with a 19mm tape feed bearing, ensuring correct tape tension.

A replacement tape tension spring for Roland Space Echo units with a 22mm tape feed bearing, ensuring correct tape tension.

A replacement tape tension spring for the Echo Fix EF-X2 and EF-X3 tape echo units.

A replacement tape tray for the Echo Fix EF-X2, EF-X3 and Roland RE-201, RE-101, RE-150.

A DIY service kit for the Echoplex EP3 and EP4, including a pinch roller, tension springs with felt, drive belt, replacement tape, splicing tabs and a capacitor kit.

A precision-made replacement rubber pinch roller with low friction sealed bearings for the Echoplex EP1 and EP2 tape echo. It is a user-serviceable upgrade over the original rubber roller and is intended for use during regular servicing.

A pair of replacement tape loops for the Vocu VTE-2000 tape echo.

A new replacement VU meter designed to fit the Roland Space Echo RE-201, RE-150, RE-101 and RE-301 units with serial numbers above 49950.

A replacement lamp (bulb) for the VU meter used in the Roland Space Echo range including RE-101, RE-150, RE-201, RE-301, RE-100 and RE-200.

A replacement rubber drive belt for the Echoplex EP1, EP2, EP3, and EP4 tape echoes, supplied in three sizes used across different production years.

A table-top tape echo featuring analog BBD chorus and analog spring reverb, with individual playback head outputs, auto tape stop, and CV control for motor speed and feedback.

A table-top tape echo featuring analog BBD chorus and analog spring reverb, with individual playback head outputs, auto tape stop, and CV control for motor speed and feedback.

A table-top tape echo featuring analog BBD chorus and analog spring reverb, with individual playback head outputs, auto tape stop, and CV control for motor speed and feedback.

A tolex-enclosed tape echo featuring analog BBD chorus and analog spring reverb, with individual playback head outputs, auto tape stop, and CV control for motor speed and feedback.

A table-top tape echo variant with vintage-voiced tape heads, wow and flutter modulation controls, extended motor speed range, analog spring reverb, and live tape looping via record/erase head control.

A table-top tape echo variant with vintage-voiced tape heads, wow and flutter modulation controls, extended motor speed range, analog spring reverb, and live tape looping via record/erase head control.

A tolex-enclosed tape echo variant with vintage-voiced tape heads, wow and flutter modulation controls, extended motor speed range, analog spring reverb, and live tape looping via record/erase head control.

A rackmounted analog tape echo built on the EF-X3R platform, featuring wow and flutter controls, an analog spring reverb, analog BBD chorus, and live tape looping via Record/Erase Off controls.

A rackmounted analog tape echo built on the EF-X3R platform, featuring wow and flutter controls, an analog spring reverb, analog BBD chorus, and live tape looping via Record/Erase Off controls.

An analog BBD chorus pedal with an extended feature set, offering rate, depth, resonance and wave shape controls for effects ranging from subtle pitch glides to fast Leslie-style wobbles. It includes a direct mute footswitch for vibrato mode.

A DIY modification kit for the Roland RE-201 that adds an analog BBD chorus/vibrato circuit with direct signal off and motor on/off switch modes. It includes a new painted metal front panel cover housing the chorus PCB, switches and potentiometers.

An original replacement reverb tank for the Echo Fix EF-X2, EF-X3 & EF-X3R units.

A replacement LA4140 reverb driver integrated circuit for later model Roland Space Echo units.

A 100% analog FET-style dynamics processor pedal with input and output transformers, variable attack and release, a mix control for parallel compression, a high-pass filter, and switchable compression ratios.

A rack-mounted tape echo unit with analog BBD chorus and analog spring reverb, featuring four playback heads with individual outputs for stereo ping-pong effects from a mono source, an auto tape stop circuit, and CV control for motor speed and feedback.

A DIY FET preamp/buffer kit for the Roland RE-201 that solders directly to the instrument jack to clear up muddy guitar tone and add FET saturation when driven.

A spring reverb pedal featuring a three-spring reverb tank, adjustable spring drive, bass and treble EQ controls, and reverb volume control. It includes footswitches for reverb bypass and direct signal mute, and can accept audio from synths and other devices as well as guitar.