After Later Audio

A Eurorack CV/audio mixer with dual VCA sections, two CV mixer sections offering min/max/comparator/sum outputs, and LM13700-based VCAs with a near-linear response curve.

A simple Eurorack voltage-controlled panner with CV-controlled level, where the left input normals to the right input for easy mono-to-stereo panning.

An interface module for the 1/4-inch case jacks in Intellijel cases, offering switchable consumer or professional line level input/output and a pedal-level channel, feeding the case output to a headphone amp.

A dual voltage-controlled amplifier based on the Mutable Instruments Veils, with gain and response curve controls that can be chained together to form a multi-channel mixer.

A dual voltage-controlled amplifier based on the Mutable Instruments Veils, with gain and response curve controls that can be chained together to form a multi-channel mixer.

An expander module for the Alan and Benjolin V2 modules that enables manipulation of the stepped CV sequence to create related sequences, daisy-chainable for multiple units.

A 1U Intellijel format module based on the Mutable Instruments Branches that routes incoming gate or trigger signals to one of two outputs based on a probability coin flip.

A utility module that converts gate signals into triggers and trigger signals into gates, with LED indicators for input and output states.

A utility module that converts gate signals into triggers and trigger signals into gates, with LED indicators for input and output states.

A module based on the Ornament and Crime design running Phazerville firmware, offering 8 CV outputs, 8 CV inputs, 4 trigger inputs, and stereo audio in/out.

Send VCA is an expander for the Bartender and Barback mixer modules that enables CV control of send bus levels for up to eight channels.

SHTH is a Eurorack module that creates stepped voltage outputs using sample & hold and track & hold synthesis techniques, including a built-in noise source and meandering walk voltage.

SHTH is a Eurorack module that creates stepped voltage outputs using sample & hold and track & hold synthesis techniques, including a built-in noise source and meandering walk voltage.

A two-channel summing and inverting utility module. Each channel sums two inputs at unity gain on one output and provides an inverted sum on a second output, with the second channel normaled to the first for a 3:1 configuration.

A Eurorack power supply providing 2.5A on both the +12V and -12V rails, with a 5V rail that draws from the +12V rail. Includes a 12-position flying bus cable and wall power supply.

A Eurorack power supply providing 1.25A on both the +12V and -12V rails, with a 5V rail that draws from the +12V rail. Includes a 12-position flying bus cable and wall power supply.

A pack of five high quality braided patch cables for Eurorack systems, 12 inches long.

A pack of five high quality braided patch cables for Eurorack systems, 18 inches long.

A pack of five high quality braided Eurorack patch cables, 24 inches long.

A pack of five high quality braided patch cables for Eurorack systems, 6 inches long.

A set of five stackable Eurorack patch cables with a shorter connector design. Each end has both a male and female jack for stable stacked patching.

A pack of five green right angle Eurorack patch cables measuring 12 inches (30cm).

A pack of five blue right angle Eurorack patch cables measuring 18 inches.

A pack of five black right angle Eurorack patch cables measuring 24 inches.

A pack of five pink right angle Eurorack patch cables measuring 6 inches (15cm).

A set of five stackable Eurorack patch cables with a shorter connector design for more stable patching. One end has a male and female jack while the other end has just a male connector.

A set of five stackable Eurorack patch cables where each end has both a male and female jack, allowing multiple cables to be stacked in a single jack.

A destructive harmonic generator combining a Buchla-inspired wave folder with a pre-fold harmonic-generating Press section, with crossfaders for parallel or serial blending.

A multimode filter offering simultaneous low-pass, band-pass, high-pass, and notch outputs in 6HP, with resonance capable of self-oscillation.

A multimode filter offering simultaneous low-pass, band-pass, and high-pass outputs in a 14HP Intellijel 1U format, with resonance capable of self-oscillation.

Popple is an 8HP multimode stereo filter Eurorack module based on the Mutable Instruments Ripples V1 filter section, offering two independent audio paths with shared resonance and cutoff controls. It can self-oscillate at high resonance to act as a dual sine wave oscillator.

A stereo ladder filter offering HP, BP, LP2, and LP4 outputs for each side, with a bias knob that can create detuning, glitchy, and warbly sounds.

A mixer/crossfader and wavefolder module that works with the COCO oscillator system or standalone, featuring a five-stage wavefolder, input and output crossfaders, and CV control over all parameters.

An exact hardware replica of the Mutable Instruments Ripples filter module.

Rob Hordijk's latest revision of the classic Benjolin, a chaotic synth voice built around two oscillators, a rungler stepped CV generator, and a multimode filter.

A quirky Eurorack module that can be used as a four-voice oscillator or an unusual CV source, designed for experimental patching, glitchy rhythms, drones, and control voltage generation.

A CEM3340-based Eurorack triangle-core oscillator offering a wide frequency range, four waveform outputs, V/OCT tracking, linear FM, and switchable hard or soft sync.

A compact 4hp thru-zero FM Eurorack oscillator designed as a secondary or tertiary oscillator, featuring switchable tuning ranges and both hard sync and soft sync (time reverse).

A Eurorack sub-harmonics generator with two independently clocked sections producing odd and even sub-harmonics, crossfaded together for use as audio or CV sources.

A fully featured analog Eurorack oscillator offering through-zero FM, a CV-morphable waveshape output, a cosine output, VCO and LFO ranges, and built-in amplitude modulation.

An 8HP micro version of the Mutable Instruments Tides v2/2018, functioning as an LFO, oscillator, AD-style envelope generator, or AR-style envelope generator via its triangle function generator and waveshaper.

A 4x4 matrix mixer with VCAs on each output and switchable unipolar/bipolar controls, featuring built-in modulation sources normalled into each channel.

A pair of modules connected by a CAT7s cable that transmit 8 channels of audio or modulation over ethernet between two cases, with optional buffering on up to four channels per side.

A three-channel mixer with switchable attenuators/attenuverters per channel, featuring pin header chaining for use with other mixer modules.

Fixed

A buffered/active mult with LED indicator offering two channels of 1-to-3 multiples, with channel 1 normalled to channel 2 for a 1-to-6 configuration.

A buffered/active mult with LED indicator offering two channels of 1-to-3 multiples in a 1U Intellijel format module, with channel 1 normalled to channel 2 for a 1-to-6 configuration.

A full-size replica of the Mutable Instruments Tides V2, a triangle function generator and waveshaper usable as an LFO, oscillator, or envelope generator.

A dual-channel Eurorack module offering function generator, oscillator, slew limiter, envelope, and VCA functionality per channel, cascadeable for more channels.

An ADSR-style envelope generator based on the CEM3310 chipset found in classic synthesizers, adding end-of-attack and end-of-release delayed triggers in a compact 6HP module.

A full-size version of the Mutable Instruments Warps modulator, functionally identical and compatible with the original's firmware.

QARV is a four-channel Eurorack module combining function generators, oscillators, slew limiters, envelopes, and VCAs, usable as a standalone synth voice, modulation source, or a four-channel envelope generator with mixer.

An exact hardware replica of the Mutable Instruments Clouds texture synthesizer/granular processor module.

A pedal version of the Typhoon stereo granular sampler, replacing modulation jacks with dip switches usable with external modulation or an onboard LFO.

A granular texture synthesizer module combining the features of Storm with the sliders and layout of Monsoon, running the SuperParasites firmware for granular clouds, pitch shifting, looping delay, spectral processing, reverb, resonator, beat repeat, and spectral clouds modes.

A micro version of Mutable Instruments Clouds that retains all the functions of the original in a smaller format, with Parasites 2.01 firmware loaded by default.

An exact hardware replica of the Mutable Instruments Marbles random sequencer module.

A random looping stepped CV and burst generator that can act as a random stepped CV source or a repeating 8-step CV source, triggerable via a burst generator.

A random looping stepped CV and burst generator that can act as a random stepped CV source or a repeating 8-step CV source, triggerable via a burst generator.

An 8HP functional clone of the retired Mutable Instruments Grids drum sequencer module, compatible with any firmware that runs on the full-size version.

A Eurorack mixer module with four stereo channels, two stereo aux sends, and two stereo returns, featuring a built-in cueing system and expandability with other mixer modules.

A replacement rear PCB for the Bartender V1 mixer that adds the same expansion headers found on Bartender V2, including outs, EQ, and inserts.

Sends is a Eurorack expander that adds four send and four return buses to the Bartender V2/Barback V2 mixer system, or functions independently as a 4x8 stereo matrix mixer.

A replacement silver aluminum panel for the Pixie module that includes two silver capped knobs for a matching look.

A tin of 30 M3 or M2.5 rack screws with nylon washers for mounting Eurorack modules, usable by hand or with a Phillips head screwdriver.

A replacement silver aluminum panel for the Resonate module that includes two silver capped knobs for a matching look.

A stereo compressor featuring threshold, ratio, makeup gain, attack, and release controls, plus sidechain input to help sounds cut through a mix.

A small stereo compressor module with threshold, ratio, and makeup gain controls plus sidechain capability. Timing is fully automatic.

A Eurorack module with two fuzz channels based on the fuzz face circuit and a built-in pickup simulator for interfacing Eurorack signals as guitar-like input.

A guitar pedal with two fuzz channels based on the fuzz face circuit, requiring a 9V tip-negative power supply.

A simple two-channel USB audio interface based on the PCM2904 chipset, supporting 16-bit/48kHz class-compliant USB audio for recording and playback, with a standard mode and an insert mode.

A guitar pedal wavefolder with drive circuits before and after the folding stage to shape and add character to the folded signal, with controls for dry/wet, tone, and level.

A function generator and ADSR envelope generator based on the classic Serge Slope Generator, capable of working as a slew limiter, envelope generator, LFO, or audio-rate oscillator with separate exponential/logarithmic controls for rise and fall.

A MIDI-to-CV converter in Intellijel 1U format based on Mutable Instruments Yarns, retaining all four-voice functionality with 3.5mm MIDI input/output jacks and a case power connector.