Neunaber

The 101 Reverb is a compact solid-state guitar amplifier delivering up to 50 watts, featuring a 3-band active EQ, gain, limiter, reverb, and an effects loop.

The Aviator Cub UK is a single-channel guitar combo amplifier offering three switchable voicings (AC, AC Top Boost, and JMP) with up to 50 watts through a custom Eminence 12-inch speaker.

The Aviator Cub is a single-channel guitar combo amplifier delivering three classic American amp voices (Tweed, Blonde, Black) through a custom 12-inch Eminence speaker at up to 50 watts.

The Aviator Mach 3 Combo is a two-channel, 200-watt guitar combo amplifier with twelve switchable voices, built-in reverb and tremolo, a distortion boost, and a Celestion Copperback 12-inch speaker.

A discontinued guitar amplifier head with a 200 watt power section, a classic tone-stack clean channel, and a three-way overdrive channel offering distortion tones from mild to wild.

A guitar combo amplifier for steel players, featuring a 15-inch speaker with chiming aluminum dome, 200 watts of power, and 9V pedal power.

A rack-mount guitar amplifier featuring selectable input channels, a 4-band EQ, an adjustable limiter, tremolo, and reverb, with a rear-panel effects loop.

A pedalboard-format guitar amplifier that captures three classic British amp voicings (JMP, AC Normal, AC Top Boost) with cab simulation, FRFR mode, reverb, and effects loop.

A pedalboard-format guitar amplifier that captures three classic American amp voicings (57 Tweed, 61 Blonde, 65 Blackface) with cab simulation, FRFR mode, reverb, and effects loop.

An instrument amplification head with seven controls, a 3-way voicing switch, effects loop, reverb, and cab-sim, designed for stage and studio use.

The Block Case 2.0 is a protective carrying case compatible with all Block Series amplifiers, featuring styrofoam inserts and reinforced cording.

This is a replacement handle for Quilter BlockDock and Aviator Cub/Cub UK amplifiers.

This is a replacement badge that originally came on BlockDock Series speaker extension cabinets, measuring 1 1/4" by 4 1/4".

This is a replacement handle in black simulated leather for select Quilter amplifiers including Steelaire, Aviator, and MicroPro Mach 2 Series units.

This is a replacement handle in brown leather look for the original MicroPro Gen 1 Series amplifiers.

This is a replacement retention plate for the BlockDock 12HD, BlockDock 12CB, or BlockDock 10TC speaker cabinets.

This cable connects a stereo 1/4-inch TRS phone plug to a 3.5mm TRS mini stereo jack. It can be used to connect an expression pedal or headphones with different jack sizes.

This cable directly connects pedals equipped with 2.5mm mini-MIDI connectors.

This is a 24 volt DC power adapter designed as a replacement for Quilter products requiring 24 volts DC.

A replacement Micro-B USB cable for Expanse Series v2 pedals and the Iconoclast.

A breakout cable that adapts a 2.5mm TRS MIDI connector to a 5-pin DIN MIDI connector, complying with MIDI.org's TRS specification.

The BassDock 10 is a compact bass speaker cabinet featuring a 10-inch 400-watt Eminence speaker with a horn tweeter and a rear-firing bass port, designed to pair with Quilter's Bass Block amplifiers.

The TF1018 is a 10-inch, 100W (RMS) professional mid/bass loudspeaker driver with a Kevlar-reinforced cone, designed for PA cabinets and stage monitors.

Replacement 12-inch guitar speaker for the BlockDock 12HD cabinet, rated at 300W with 8Ω nominal impedance.

Replacement neodymium 12-inch guitar speaker for the Mach 3, Gino Matteo 12 and AJ Ghent 12 combos, delivering a transparent tone without added coloration.

The Bass Block V803 is an 800-watt Class-D bass amplifier head offering three selectable amp voicings (Modern, Warm, Q-Tube), a 3-band EQ with sweepable mid, dual inputs, an effects loop, and an XLR line out.

A compact direct interface for electric guitar providing input impedance, gain, tone, overdrive, and cab simulation, running on phantom power, 9V battery, or external pedal power.

A foot controller offering hands-free control over 6 selectable functions of compatible Quilter amplifiers, with daisy-chain expansion via rear RJ45 jacks.

The DirectAmp is an analog stereo guitar preamp and cabinet simulator pedal offering three amp voicings, three speaker types, and three cab types, with stereo XLR and headphone outputs plus Bluetooth wireless input.

A dynamic multistage guitar preamp pedal with compressor, noise gate, speaker simulator, presets and MIDI control.

A reverb plugin based on the algorithm in the Immerse Reverberator Mk II pedal, offering EQ, damping, modulation, and fidelity controls to add spaciousness while maintaining clarity.

A modern optical disc player for playback of 1970s-era Optigan and Orchestron sound discs, offering speed changes, modulation, transposition, reversing, and scratching via MIDI control and physical touch.

A tape-emulation plugin featuring saturation, wow & flutter modulation, and a tape delay effect for adding analog-flavored warmth and character to digital tracks.