Alternate Mode

A 17-inch long extension arm that attaches to the DKB mounting bracket.

A mounting bracket used to attach any KAT controller to the DK1000 Stand, rack stand, or compatible clamps supporting a 7/8-inch shaft.

A heavy-duty hard case constructed of plywood with protective foam lining and metal corners, designed to protect the HybriKIT, DrumKAT, DK10, or DrumKAT Turbo.

Medium-weight rattan mallets with rubber balls designed for responsive, low-noise playing on the malletKAT.

A height-adjustable stand ranging from 28 to 42 inches, with two 16.5-inch mounting arms with adjustable rubber stoppers for mounting electronics.

A heavy, double-braced, height-adjustable stand designed to mount electronic drum modules and controller multi pads, working for standing or seated play.

A two-post height adjustable straight rack with a 43.5-inch cross bar and telescoping extender bars, designed for keyboards, DJ gear, drums, and hand percussion.

An AutoLock height-adjustable Z-style stand with locking pins and adjustable rubber feet, adjustable from 23.8 to 36.6 inches.

A Gibraltar Extended Height Snare Concert stand with large rubber/plastic basket holders that firmly hold the JamKAT or JamKAT'R in place.

Mallets with a latex inner core wrapped in yarn, slightly heavier and harder than the M-103, redesigned in 2016 for a balance of ease-of-use and response.

Mallets with a latex inner core wrapped in white yarn, slightly heavier and harder than the 103 model, sold per pair.

A lightweight soft carrying bag for the two-octave MalletKAT Express, featuring a reinforced handle and oversized shoulder strap.

A lightweight soft carrying bag for the three-octave MalletKAT Pro, featuring a reinforced handle and oversized shoulder strap.

A lightweight soft carrying bag for the four-octave MalletKAT, featuring a reinforced handle and oversized shoulder strap.

Adhesive dots that protect the malletKAT's pads and sensors while adding low-end sensitivity and a stiffer, more responsive playing surface, sold by the octave.

An adjustable, foldable stand for the MalletKAT with 8 height positions and rubber rest pads to securely hold the instrument in place.

A replacement drum pad surface for the DrumKAT featuring power dot material for improved sensitivity and reduced hand fatigue.

Strapping bars used to attach an Octave Expander to the bottom of a malletKAT.

A hi-hat controller pedal accessory that fits underneath an existing bass drum pedal with a bottom plate, using the pedal's own springs for adjustable feel.

A bass drum pedal trigger using nuBounce material for dynamic sensitivity, includes a beater and cable, and can be chained to a second eKIC.

An FSR trigger that attaches securely to the rim of any size drum without affecting tuning, offering zero crosstalk and superior dynamic range.

A trigger device that turns an acoustic drum into an electronic drum trigger.

An FSR-based controller pedal that sends linear MIDI CC data from 0-127 when used with compatible MIDI controllers.

A hand-operated 1/4-inch jack switch that functions like a standard foot switch.

A compact, lightweight 2-octave MIDI percussion mallet controller using FSR sensing technology, expandable to 4 octaves, with 127 programmable setups and splitting, layering, and hang modes. An optional GS Extended internal sound module version is also available.

The flagship four-octave MIDI percussion mallet controller using FSR sensing technology, expandable to 5 octaves, with 127 programmable setups and splitting, layering, poly/mono and hang modes. An optional GS Extended internal sound module version is also available.

A three-octave MIDI percussion mallet controller using FSR sensing technology, expandable to 4 or 5 octaves, with 127 programmable setups and splitting, layering, poly/mono and hang modes. An optional GS Extended internal sound module version is also available.

An expansion unit that adds one octave of playing pads to a malletKAT Pro, Grand, or Express controller.

A firmware upgrade chip for the DK10 percussion controller adding pad sensitivity adjustments, gate times, roll mode, latch mode, and program changes.

A firmware upgrade chip that converts a DrumKAT 2.5 to version 3.8, adding features like Interaction Matrix, melodic modes, and latch mode.

An upgrade service that converts a DrumKAT 2.5-3.8 to a DrumKAT TURBO 4.5, adding features like alternating notes, pad linking, and expanded memory.

A firmware upgrade chip that converts a DrumKAT 3.0 to version 3.8, adding features like melodic modes and additional control screens.

A firmware upgrade chip that converts a DrumKAT 3.5 to version 3.8, adding additional control screens and latch mode.

A firmware upgrade chip that converts a DrumKAT TURBO from version 4.0 to 4.5, adding auto pad play, sound paths, and control paths.

A MIDI percussion controller that plugs into a DITI trigger interface, allowing users to stack up to 8 notes per pad and create chords and melody lines using FSR pad technology.

A drum sound module built by 2Box with 4GB of onboard sounds, expandable to 32GB, offering multi-sampled layers for realistic buzz rolls and crescendos. It includes a PC/Mac editor for creating custom sounds and kits.

A compact electronic drum and percussion pad sound module playable with hands or sticks, featuring 50 adjustable multi-purpose sounds assignable to four responsive pads with tunable reverb, sensitivity, and level controls.

An electronic drum trigger surface offering wide dynamic range and sensitivity, fitting a 10 inch diameter drum, and requiring a single 1/4-inch input on a DITI or FTB for power and MIDI data.

An electronic drum trigger surface offering wide dynamic range and sensitivity, fitting a 12 inch diameter drum, and requiring a single 1/4-inch input on a DITI or FTB for power and MIDI data.

An electronic drum trigger surface offering wide dynamic range and sensitivity, fitting a 13 inch diameter drum, and requiring a single 1/4-inch input on a DITI or FTB for power and MIDI data.

An electronic drum trigger surface offering wide dynamic range and sensitivity, fitting a 14 inch diameter drum, and requiring a single 1/4-inch input on a DITI or FTB for power and MIDI data.

An electronic drum trigger surface offering wide dynamic range and sensitivity, fitting a 16 inch diameter drum, and requiring a single 1/4-inch input on a DITI or FTB for power and MIDI data.

An electronic hand drum controller that connects to a DITI 3 or FTB trigger interface via an HD15 cable, sending trigger data to a drum module or DAW.

An electronic hand drum banjo-style hybrid instrument with additional FSR trigger zones on its neck, requiring a DITI Trigger Interface for power and MIDI communication.

An extension arm with a 7/8-inch to bar clamp used to attach the KT-M1 module to a rack stand.

A heavy duty rack stand with a 36 inch cross bar and two 30 inch vertical posts with dual position fixed T legs.

A heavy duty rack stand with a 43.5 inch cross bar and two 36 inch vertical posts with dual position fixed T legs.

A clamp that connects a 1.5 inch bar to another 1.5 inch bar and allows 360 degree rotation.

A Pearl-type grabber clamp with an angled center post and a rotating clamp at each end.

A 10-foot cable with an HD15 connector on one end and 12 mono 1/4-inch plugs on the other, used to connect the FTB output to standard drum modules.

A replacement cable for the malletKAT Octave Expander.

A screw-in power cord for older style DrumKAT and EZ units.

A 6 foot professional MIDI cable.

A GUI editor for PC that lets users program and save settings for the DITI trigger interface.

A GUI editor for PC that lets users program and save settings for the DITI trigger interface.

The FTB is an FSR trigger box that powers FSR trigger sensors, supporting up to 6 single-zone or 6 dual-zone sensors. It outputs 6 stereo trigger outs that connect directly to drum module trigger inputs.

A portable continuous controller footswitch with an FSR sensor for use as a pitch bend or hi-hat pedal on Alternate Mode controllers.

A normally open momentary footswitch used with KAT controllers, standard with all units and available for additional footswitch inputs.

A single chain cam drive bass drum pedal with a flat-bottomed pedal board and a dual surface weighted beater.

A single chain bass drum pedal with a curved G Class pillar frame, single point beater adjustment, and a side mount hoop clamp.

A compact sound module offering over 4GB of high quality percussion and instrument sounds, capable of streaming 256-voice, multi-timbre polyphony over 16 MIDI channels for electronic percussionists.

An improved sound module with a 4GB sound engine featuring expanded ethnic and melodic percussion libraries, upgraded amplifiers, and TRS balanced 1/4-inch outputs for studio recording.

The KA8 is an active drum amp/monitor speaker with an 8-inch woofer and compression driver. It includes onboard DSP EQ presets, Bluetooth streaming, and multiple audio inputs including a 1/4-inch drum input and headphone output.

Passive isolation headphones designed for drummers that reduce external noise by 26dB, featuring 40mm drivers and a 20-20,000Hz frequency response for private practicing and studio monitoring.

A free software editor for configuring malletKAT User Kits, Chains, and Reassignment Modes from a PC or Mac.