Carvin

A set of 3-inch heavy duty caster wheels for the TRx3118A subwoofer.

A padded carrying bag that holds two TRx3900 or TRx3903 column speakers, featuring a velcro closing flap and two side pockets.

A replacement 8-ohm, 1-inch high frequency driver assembly used in several Carvin guitar and bass combos and pro audio loudspeakers.

A complete replacement 8-ohm high frequency driver used in several Carvin loudspeakers.

A protective cover designed to fit the TRx3118A 18-inch subwoofer during transit and storage.

A heavy duty vinyl cover designed to protect two TRx5118A subwoofers during transport and storage.

A heavy duty vinyl cover designed to protect four TRx5210AN line array units during transport and storage.

A protective cover for the QX15A loudspeaker with removable front and rear panels allowing the speaker to operate while covered.

A protective cover for the SCx12A loudspeaker with removable front and rear panels allowing the speaker to operate while covered.

A ground transport dolly designed to move two TRx5118A subwoofers or four TRx5210AN line array elements, featuring 5-inch swivel casters with locking brakes.

A direct replacement diaphragm for the HT-151-16 high frequency driver assembly used in numerous Carvin loudspeakers.

A 12-inch 4 ohm replacement woofer used in Carvin SCx12A loudspeakers.

A 15-inch 4 ohm replacement woofer used in several Carvin loudspeakers.

A 15-inch 8 ohm replacement woofer used in several Carvin loudspeakers.

A 3.5-inch 8 ohm replacement driver used in the Carvin TRx3900 column array loudspeaker.

A pull-back bracket for the TRx3900F/TRx3903 column array, providing an attachment point to angle and aim the speaker system.

A wall mounting bracket for the TRx3900F column array offering 27 degrees of vertical tilt and 67 degrees of horizontal swivel to aim the speaker.

A mounting bracket that lets the TRx3900F column array be attached to a wall or suspended from a ceiling, also allowing a pair of arrays to be joined.

A hardened steel quick release pin used for flying or ground stacking the TRx5210AN line array with the TRx5118A subwoofer or suspension grid hardware.

A solid aluminum connecting pole set used to connect TRx3900 or TRx3903 column array loudspeakers to the TRx3118A subwoofer.

A top hat pole mount cup for the TRx3900F loudspeaker that uses the SS7 pole connector.

A 12-inch, 100 watt guitar speaker with an 8 ohm impedance designed for added definition with both single coil and humbucking pickups.

A 2000W modular active column array PA system combining an 18-inch subwoofer with a dual column array for controlled coverage live sound reinforcement.

A 4000W modular active column array PA system with dual subs and dual columns for increased coverage and higher power live sound reinforcement.

An 8000W modular active column array PA system with a high-output multi-sub, multi-column architecture for maximum coverage live sound reinforcement.

A pair of 3.5-inch column array loudspeakers with nine matched drivers each, delivering long-throw, controlled-dispersion sound with fly points for flown or wall-mounted installation.

A 1550W active dual 10-inch neodymium line array element with IP45 weather rating and networked DSP, designed to be scaled up to twelve elements per side for large audiences.

An AC locking power cable for the TRx5118A subwoofer with IP65 weather rating.

An AC locking jumper cable for connecting two TRx5118A subwoofers, IP65 weather rated.

An AC locking jumper cable for connecting two TRx5210AN line array elements, IP65 weather rated.

A speaker cable with twist lock connectors used to connect Carvin column array systems and subwoofers.

A cable that connects a guitar or bass to the UX600B beltpack or UX1200B wireless system, replacing a traditional instrument cable.

A wireless belt pack microphone system featuring a true-diversity receiver and belt pack transmitter, ideal for theater, live music, and spoken word presentations.

A wireless handheld microphone system with a true diversity receiver, designed for live music and spoken word use.

A body pack wireless transmitter for theater, live music and spoken word presentations, allowing microphone freedom without a cable.

A handheld wireless microphone designed for live music and spoken word presentations, delivering rich vocals with intelligible mids and crisp highs.

A wireless system that transforms an existing wired microphone into a wireless one, using the 5GHz band for low-interference transmission.

A bass preamp pedal offering a flat boutique response with extensive tone shaping, a mid-sweep semi-parametric EQ, and a built-in compressor with threshold and strength controls.

An acoustic guitar preamp offering natural acoustic tone with extensive tonal control, including gain, EQ, compressor, and effects loop.

A tube preamp pedal delivering the sound of Steve Vai's Legacy amplifier, usable as a preamp, pedal, or direct output device.

An all-tube guitar preamp pedal that delivers the sound of the classic Carvin X-100B amplifier in a compact pedal format with added connectivity.

A 2-channel PFC power amplifier providing pure amplification with a lightweight 1U frame, capable of 2 ohm operation and 4 ohm bridged design.

A 4-channel PFC power amplifier delivering high output with flexibility, featuring a lightweight 1U frame and 2 ohm/4 ohm bridge operation.

A 2-channel PFC power amplifier designed for large events with multiple subwoofers, featuring a lightweight 1U frame and maximum headroom.

An over-ear headset microphone designed for speaking and theatrical use, offering high intelligibility, a tight natural sound and superior feedback rejection versus a lavalier mic.

A wireless headset microphone system including a true-diversity receiver, belt pack transmitter, and tan over-ear headset microphone, designed for speaking and theatrical use.

A cardioid lavalier microphone designed for speaking engagements, offering natural sound with crisp highs and defined lows via a discreet clip-on design.

A wireless microphone system for spoken word presentations, including a receiver, a lavalier lapel microphone, and a beltpack transmitter.

A 15-inch active 2-way loudspeaker with bi-amp power, built-in DSP, Bluetooth streaming, and 3 selectable inputs for Mic, Line, or BT operation, usable as a main, monitor, or DJ speaker.

A 12-inch active 2-way loudspeaker with bi-amp 1000W power and built-in DSP limiting, designed for main or monitor use.

An active 18-inch subwoofer with 2000W Class D amplification and Analog Devices DSP, providing deep bass and powering an optional HF satellite output.

A flyable 2000W active 18-inch subwoofer with dual bridged Class D amplifiers, IP45 weather rating, and networked DSP control for large-scale live sound reinforcement.

A direct box (DI box) that converts an instrument's line level signal into a balanced XLR signal for sending to a mixing board, featuring an input attenuator and ground lift.

A wireless guitar/bass system with a true-diversity receiver, belt pack transmitter, and 1/4-inch instrument cable for freedom of movement on stage.

A compact stereo pedal amplifier for guitarists, delivering 100W (50W/50W) to drive two guitar cabinets, with a line-in jack and headphone output.

In-ear earbuds designed for use with the EM900 in-ear personal monitor system, delivering deep bass, intelligible mids, and natural highs with multiple tip sizes for fit and isolation.

A wireless system for guitar and bass that transmits digitally, working with both active and passive instruments.

A replacement 9VDC power supply for the BX1 and KOA preamp pedals.