A stereo link cable built on newly developed small 1/4-inch stereo plugs with 17 mm caps, for connecting expression pedals to effects units or carrying MIDI signals inside a pedalboard.
46 products
A stereo link cable built on newly developed small 1/4-inch stereo plugs with 17 mm caps, for connecting expression pedals to effects units or carrying MIDI signals inside a pedalboard.
¥7,600
The CB-6560 series of microphone and line cables is built to express the beautiful sound of music, accepting everything from very low microphone signals to the line level signals of mixers and other devices.
¥2,400
A MIDI cable terminated with original FREE THE TONE design miniature L-plugs that allow 360-degree access, so MIDI pedals take up far less pedalboard space.
MIDI cable terminated with an L-shape 3.5 mm stereo miniature plug at one end and a 360-degree accessible DIN plug at the other. Two-core shielded wire protects the MIDI signal from external noise.
A 15 cm MIDI conversion cable that converts a 5-pin DIN MIDI plug to a 3.5-mm stereo mini plug.
A shielded instrument DC cable for feeding power from a pedalboard supply to an effects unit, built to block external noise and keep power transmission loss to a minimum.
A short DC conversion cable that lets an effects unit powered through a 3.5 mm mini-plug run from a standard 5.5 by 2.1 mm centre-minus adapter or power supply.
A 4-way DC power splitter cable that feeds 9 VDC from one AC adapter to four effects units, split close to the power source so the shared current path stays very short.
¥8,000
A speaker cable designed exclusively for musical instruments, built to convey the character of a guitar or bass amplifier completely to the speaker.
¥3,600
An instrument link cable built around an uncommon 5 mm diameter for connecting effects units together, with the soldered section protected against the load that cable tension places on it.
An instrument cable built around a woven fiber protective sleeve and a cast zinc alloy plug cap, developed over five years and more than twenty prototypes to deliver the sound that makes you want to keep on playing.
¥7,500
An instrument cable from Free The Tone's Integrated Series, derived from the CU-6550 with revised structural members and a different sound tuning for a punchier, lower-weighted tonal balance.
¥2,200
Solderless plug for the 4 mm CU-416 Instrument Link Cable, part of Free The Tone's 2019 renewal of its solderless cable series. The plug's tip and core wire connection pin are integrated for more direct signal transduction, and the cap is replaceable in six colours.
¥2,000
Solderless plug that lets a custom shielded cable be built from any single-core shielded cable of 5 to 7 mm diameter without soldering, using separate contact points for the core wire and the shield. Offered as a standard-length cap for guitar and bass cables and a short cap for pedalboard link cables.
¥40,000
From a natural overdrive sound to a distorted sound, the "BLACK VEHICLE" can create a wide variety of sounds similar to driving a vacuum tube amplifier.
¥38,000
FIRE MIST for True British Rock Sound
¥44,000
A two-channel overdrive pedal built to be as lustrous and distinctive as the elusive DUMBLE amplifiers, pairing a clean-to-crunch Normal channel with a dedicated drive circuit module and an internal boost supply.
¥57,000
The Custom Shop OVERDRIVELAND, in a laser-engraved solid die-cast case, with custom drive modules that respond more sensitively to input signals and an internal boost supply adjustable from DC10V to 19V.
¥62,000
A modified ODL-1-CS that keeps the original sound and adds a CH.CONT channel control terminal, so the NORMAL and DRIVE channels can be switched from an external latch-type switch or an ARC series control terminal.
¥31,000
The RED JASPER RJ-2V is a low gain overdrive pedal with a passive HI-CUT tone circuit and a four-position mode switch for low frequency characteristics.
¥40,000
A Custom Shop revival of the SOV-2 overdrive, whose internal DC-DC converter boosts the 9 Vdc input to plus/minus 15 Vdc to give the signal circuit an overwhelming dynamic range and the soft harmonics of a vacuum tube.
¥38,000
STRING SLINGER for Best American Blues Sound
¥38,000
The COSMIC WAVE CW-1Y is a compact digital delay with multiple filter functions, a reverse delay and an adjustable output bit depth from 8 to 24 bits.
¥58,000
HIGH SOUND QUALITY DIGITAL DELAY
¥52,000
New World of Fluctuation Created by Dual Delay
The flagship model of Free The Tone's ARC Series routing controller, reborn as the ARC-4 by greatly enhancing its predecessor's functions in order to handle systems that are growing increasingly more sophisticated. Eight effect loops, named banks and presets, a setlist mode, MIDI clock support and hands-on stereo loop, boost and phase invert functions.
A downsized Audio Routing Controller that inherits the versatility, sonic quality and durability of the ARC-3, with the HTS (Holistic Tonal Solution) circuit driven by internal plus/minus 15 VDC and control of MIDI devices packed into a smaller housing.
¥26,000
An expansion loop box developed to control various signal lines, adding two loops to an ARC-3 or ARC-53M or providing effect loops for an amplifier's send and return.
¥36,000
A Custom Shop limited production of the SILKY COMP SC-1, a compressor pedal whose special soldering process gives it a natural, glossy silky smooth sound, with an ATTACK control that reaches limiter territory at its highest setting.
¥27,000
The SILKY GROOVE SG-1C is a compressor pedal for guitar and bass with a dry mix circuit, based on the SILKY COMP from Free The Tone's Custom Series.
Volume pedal built around Free The Tone's Full-Rotation Belt-Drive system, which uses a gear and belt rather than a string to drive the variable resistor and links pedal travel directly to volume change. The DVL-1H is the high impedance model, for use after a high impedance device such as a passive pickup, a fuzz pedal or a vintage effects unit.
¥19,000
The Free The Tone PHV-1 is a device which inverts the signal phase of an effects unit or amplifier, taking the input signal from in phase to out of phase or out of phase to in phase. A switchable input impedance and a remote jack let it sit anywhere in a rig, including under the control of an ARC Series routing controller.
¥33,000
Phase analyzer that measures whether a device or a chain of effects units passes signal in phase or out of phase, using a generated test signal in either a repeated or a continuous measurement mode. Combined with the ARC-4 Audio Routing Controller it also displays the level of the signal fed to or output from that unit, and the waveform of the incoming signal.
¥25,000
The CRUNCHY CHIME CC-1B is a booster pedal for guitar and bass with an equalizer function, offering a boost range of -16 dB to +17 dB.
¥45,000
The TRI AVATAR TA-2H is a chorus pedal with four signal paths, three chorus sounds (three phases) plus one dry signal, mixed in the analog domain.
¥38,000
The MOTION LOOP ML-1L is a short looper that performs short-term sampling and real-time effect processing such as pitch shift, delay and filter.
¥19,000
The MB-5 receives one stream of MIDI data and splits it into five to enable parallel data transmission. By receiving MIDI data directly from the MB-5, devices can avoid the problems that can occur when they are connected serially.
¥26,000
An easy-to-use, compact programmable MIDI controller that operates in two modes, Mode-1 for sending program change numbers and Mode-2 for presets that can also carry control change numbers.
¥28,000
The INTEGRATED GATE IG-1N is a noise reduction and noise gate pedal with a fully analog audio path controlled by a digital signal monitoring circuit, switchable via MIDI.
A 25.4 mm wide hook-face fastener tape, custom ordered from Velcro and the same fastener FREE THE TONE uses to secure effects units on the pedalboards it builds for professional musicians.
¥17,000
A signal junction box that collects the inputs and outputs of a pedalboard or rack into one place, carrying four 1/4-inch mono phone jacks and two 7-pin DIN connectors for MIDI cables and ARC series link connections.
¥26,000
A light, compact pedalboard power supply with two completely independent isolated output terminals (9 VDC/500 mA) and six low-noise standard output terminals (9 VDC/100 mA), able to power up to eight lines.
¥45,000
THE ULTIMATE IN REVERB AMBIENCE
This data is open source. View or improve this entry on GitHub. View on GitHub
Catalog data as of