MX4
$99.95
MX4 is a Eurorack Buffered MIDI Multiple module that takes in a single MIDI input and repeats it in real time to four MIDI outputs, letting one MIDI source control up to four devices at once.
Midi
51 products
- 1010 Music
After Later AudioThreads 1U
$249
A MIDI-to-CV converter in Intellijel 1U format based on Mutable Instruments Yarns, retaining all four-voice functionality with 3.5mm MIDI input/output jacks and a case power connector.
ALM Busy CircuitsmmMidi
£170
The mmMidi is a compact 4HP MIDI-to-CV interface for Eurorack synthesizers that translates two independent channels of MIDI note, velocity, and gate information into corresponding control voltage signals. It supports both classic MIDI DIN and driverless USB-C MIDI connectivity, and also converts MIDI Clock to analog x24 clock and Run outputs for DIN Sync.
Bastl Instruments1983
€200
A polyphonic MIDI to CV interface with creative voice allocation and automatic tuning via oscillator feedback. Four channels of CV and gate output with six layout modes: 4-voice polyphony, 3+1 voice, velocity, quantizer, 8 gates, and 8 CC channels. Each channel has a LISTEN input for automatic tuning calibration. TRANSPOSE and PORTAMENTO CV inputs, WINDOW and UPDATE jacks for creative note allocation. Full MIDI support: Note On/Off, CC, Velocity, Pitch Bend, Clock, Aftertouch. Microtuning (µTune) for per-semitone scale editing within an octave.
- Befaco
MIDI Thing V2
€326.70
MIDI Thing V2 is a flexible MIDI to CV converter for Eurorack, enabling polyphonic note handling, envelope and LFO generation, and conversion of all available MIDI messages into control voltage. A major upgrade from the original MIDI Thing, it adds a built-in screen for easy configuration, 12 assignable ports, TRS type A MIDI IN and OUT, USB Host and Device connectivity, MIDI merge output, a web-based configuration tool, and a VCV Rack bridge counterpart.
- Befaco
VCMC
€363
The VCMC (Voltage Controlled MIDI Controller) is a fully editable Eurorack MIDI controller featuring eight faders and eight push buttons, each with associated CV or gate inputs for automation via external signals. All controls are independently mappable to any MIDI message type — CC, Notes, Program Change, Clock, Start/Stop, and NRPN — and output via DIN-5 or USB as a class-compliant MIDI device. Configurations are saved internally and can be managed via Sysex or the Befaco online web editor.
Black Lion AudioMIDI Eight
$349
8-in 8-out MIDI interface with standalone functionality and powered USB hub
- Bome Software
Essentially, BMIDI provides a simple library which allows applications to expose one or more MIDI ports to other MIDI applications. Those other applications use the BMIDI ports as if they were external hardware MIDI ports.
Bome SoftwareBome Network is a versatile solution for creating reliable and low-latency MIDI connections over Ethernet or Wi-Fi. Available for macOS, Windows, Linux, Raspberry Pi, and iOS, it makes it easy to connect computers, mobile devices, and MIDI hardware across your network.
Bome SoftwareBome Network Pro
€39
This add-on for Bome Network allows you to establish MIDI connections from computer to computer, and also to Apple tablets and smartphones via Ethernet and via WiFi. This is similar to Apple's Network MIDI, except that it seamlessly works with the BomeBox, too, and Network pairings are persistent across reboots.
Bome SoftwareBomeBox
$245
The BomeBox is the solution for connecting and mapping MIDI devices via MIDI DIN, USB, Ethernet, and WiFi (without the need of a computer).
Bome SoftwareThe second-generation BomeBox is a standalone MIDI router and network interface, adding 2x MIDI DIN inputs and outputs, 2x USB host ports, and more memory and processing power for MIDI processing.
Bome SoftwareDiscontinued
CS1x-Edit is a program for Windows 95, 98, and ME to administer the Yamaha CS1x Control Synthesizer through your PC.
- Bome Software
Bome MIDI Translator Classic is the smaller sister of MIDI Translator Pro. It has the same powerful MIDI processing engine, but can only convert MIDI messages to other MIDI messages, or to keystrokes.
Bome SoftwareBome MIDI Translator Pro is a versatile MIDI mapping, processing, and scripting tool. Create custom MIDI routings, rules, logic, layers. And with keystroke and mouse emulation, you can control any software on your computer using a MIDI controller.
- Bome Software
Mouse Keyboard
€20
Use your computer keyboard and mouse to play and control MIDI instruments. Bome Mouse Keyboard is a flexible tool for composing, playing, and controlling synths without hardware.
Bome SoftwareThis powerful utility for Windows creates small Sys Ex messages and can send them to any MIDI device. It's also a great little MIDI monitor, and can easily test small Sys Ex requests, since the reply as well as all other events from the MIDI device are displayed.
Chase Bliss AudioMIDIbox
$59
The Chase Bliss Audio Midibox allows you to connect Chase Bliss Audio (or Empress) pedals to a standard MIDI cable.
- Circuit Happy
The Missing Link, Junior is a desktop CV and MIDI clock generator that syncs hardware to Ableton Live or any DAW supporting Ableton Link. It enables jamming with iOS music apps, DJ/VJ software, and other Link-enabled hardware.
Conductive LabsMRCC
$439
A standalone MIDI Router Control Center that merges, filters, and routes MIDI without a computer, with a full matrix routing monitor and up to 250 saveable routes.
Conductive LabsDiscontinued
A discontinued, non-expandable MIDI router offering per-port routing buttons, MIDI merging, and preset recall without a computer.
Conductive LabsMRCC Remote 7
$54
An MRCC expansion that extends five routable MIDI outputs up to 50 feet away over a single shielded Ethernet cable.
Conductive LabsMRCC XpandR 4x1
$79
A DIN expander for MRCC that also functions as a stand-alone, class-compliant USB MIDI interface and merger.
Der Mann mit der MaschineX7
€228
The X7 is a Eurorack expander module for the DROID system that adds MIDI and USB connectivity plus four gate outputs, supporting polyphonic MIDI in and out via DIN, TRS and USB.
Empress EffectsDiscontinued
A MIDI-to-control-port converter box that lets you control Empress pedals equipped with a control port over MIDI. It converts a standard 5-pin MIDI cable into simple guitar patch cables, with four control-port outputs to drive up to four pedals at once.
Empress EffectsDiscontinued
The successor to the Midibox: a MIDI-to-control-port converter that controls Empress pedals equipped with a control port over MIDI. Adds MIDI-out relaying and LED feedback on top of the original's four control-port outputs.
IntellijelCVx 1U
$179
8 Additional CV outputs for your MIDI 1U module. Fully configurable with the Intellijel Config app. In addition to clock and transport outputs, this expander also adds poly and drum synth enhancements to the MIDI 1U.
IntellijelMake Metropolix the MIDI Hub of your eurorack case. The Metropolix Backpack Hardware MIDI communication with Metropolix through Intellijel Palette or 7U Performance Case built-in MIDI IN/OUT and USB Jacks.
IntellijelMIDI 1U
$199
The MIDI 1U system provides all the essentials to control and sync your Eurorack modular from your computer, mobile, or hardware MIDI device with a minimum of fuss. Several of the module's most important features can be changed using the two front panel buttons, with full configuration capabilities offered via the Intellijel Config app, which is available for both Mac and Windows. The connectivity, feature set, expandability, and compact size make the MIDI 1U system ideal for integrating your modular gear with the rest of your rig.
IntellijelµMIDI
$229
Mission Control All the essentials to control and sync your Eurorack modular from your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons. Get crazy with external modulation and sequencers, or just sync your rack's clock from the rest of your MIDI bus.
IntellijelDiscontinued
All the essentials to control and sync your rack to your computer, iPhone/iPad, or hardware MIDI device. No menu diving or configuration scripts, just two buttons.
IntellijelµMIDI Jacks 1U
$20
USB and DIN jacks for interfacing MIDI equipment with the µMIDI 1U module. Our 7U cases have the jacks built-in, this 1U Jacks module is for the rest of you.
- Jam Origin
MIDI Bass 3
$149.95
MIDI Bass 3 transforms your bass into a polyphonic MIDI controller. It listens to and recognizes what you're playing on your instrument then generates MIDI output to drive synthesizers, all in real time while using state-of-the-art audio tracking models optimized for bass players.
- Jam Origin
MIDI Cello 3
$149.95
Transforms violin, viola, cello, or contrabass into a duophonic MIDI/MPE instrument. Converts acoustic string instrument audio into MIDI data for studio recording and live performances, requiring no special hardware.
Jam OriginMIDI Guitar 2
$149.95
MIDI Guitar 2 turns your guitar into a polyphonic MIDI controller, converting a guitar's analog audio signal into a digital MIDI signal. It is a low latency, polyphonic software solution that needs no special hardware beyond a standard guitar audio interface.
- Jam Origin
MIDI Guitar 3
$149.95
MIDI Guitar 3 transforms your guitar into a polyphonic MIDI controller. It listens to and recognizes what you're playing on your instrument then generates MIDI output to drive synthesizers, all in real time while using state-of-the-art audio tracking models.
- Jam Origin
MIDI Guitar 3 Hex
$149.95
For guitarists who use hexaphonic pickup systems, MIDI Guitar 3 Hex offers performance that is fast, responsive, accurate, dynamic and expressive. It is also a powerful, versatile, modular guitar-effect-designer and a live performance host.
MeeblipMeeBlip cubit
$49.95
cubit is a 4-port MIDI splitter (thru box) that copies MIDI messages received at the MIDI IN and passes them to four MIDI OUT jacks through ultra-low latency active circuitry.
MeeblipMeeBlip cubit duo
$99.95
cubit duo is a combined USB MIDI interface and 4-port MIDI thru box, mirroring one MIDI output to four jacks with no software lag while also functioning as a stand-alone hardware MIDI splitter.
MeeblipMeeBlip cubit go
$79.95
cubit go is a USB MIDI interface with hardware mirroring circuitry that sends one MIDI output to four jacks simultaneously with no software delay.
Rossum Electro-MusicA MIDI mediator module that interfaces the Assimil8or sampler with MIDI instruments, controllers, and sequencers, enabling parameter modulation, preset selection, and channel triggering via MIDI.
TrillingA MIDI utility module with one MIDI TRS Type A input and five MIDI TRS Type A thru outputs.
TrillingMIDI extension
€20
A MIDI extension for Passaggio that enables playing it via MIDI note input, using a channel selected by DIP switches on the host module.
- TWA
Alt-tuner
$60
Alt-tuner is a jesusonic plug-in that retunes your MIDI keyboard or softsynth microtonally. Alt-tuner combines ease of use with powerful capabilities: you don't need to know tuning theory to get started. Well-chosen defaults get you playing right away. Alt-tuner is novice-friendly and encourages "stumbling onto" new tunings.
XOXO ModularIXO MIDI+I2C Breakout Module
$66.50
IXO is a Eurorack breakout module that provides TRS MIDI and I2C protocol access for modules like the disting mk4, disting EX, FH-2, ES-9, ER-301, and Teletype. It is 2hp wide and requires no power or busboard connections.
Show all 51 products
- XOXO Modular
This adapter cable allows you to connect old school 5-pin MIDI DIN cables to a 3.5mm TRS jack.
XOXO ModularMIDIXO TRS-MIDI Utility
$66.50
MIDIXO is a Eurorack utility module that converts MIDI signals between TRS "Type A" and "Type B" 3.5mm stereo jacks, and can serve as a TRS MIDI breakout for compatible Expert Sleepers modules using an included ribbon cable.
York ModularA Eurorack MIDI thru module using Type A TRS MIDI connections that mirrors input MIDI data to four outputs, acting as a buffered multiple for MIDI signals.
This catalog is open source. View or improve the data on GitHub. View on GitHub