1024
A discontinued buffer amplifier from dbx Professional Audio.
dbx
205 products
Professional audio manufacturer known for compressors, limiters, and signal processors.
Official siteCompressor
1046
A discontinued quad compressor/limiter featuring four independent channels of dbx compression with PeakStopPlus™ limiting, suitable for studio, tour, and portable applications.
1066
Stereo compressor/limiter/gate featuring dbx's V2 VCA technology, with selectable auto or manual compression modes for studio, broadcast, and portable PA applications.
160
The original dbx 160 is a legendary discontinued compressor/limiter that established the standard for VCA-based dynamic range processing in professional audio.
160A
A legendary compressor/limiter from the dbx 160 family featuring switch-selectable OverEasy® and Hard Knee compression curves, designed for portable, tour, and studio applications with True RMS level detection and industry-standard dynamic processing.
160SL
A discontinued Blues Series compressor/limiter featuring patent-pending AutoVelocity technology and dual V8 VCA modules with 127dB dynamic range, housed in an aircraft aluminum chassis with Jensen transformers.
160X
The 160X is a discontinued dbx compressor/limiter from the classic 160 series.
160XT
The 160XT is a discontinued dbx compressor/limiter from the classic 160 series.
161
The 161 is a discontinued dbx compressor/limiter, a companion unit to the original 160.
162
The 162 is a discontinued dbx stereo compressor/limiter from the classic 160 series.
162SL
Purple Series stereo compressor/limiter featuring dual proprietary VCA modules and AutoVelocity™ technology, with Jensen output transformers and aircraft aluminum construction for studio and live applications.
163
The 163 is a discontinued dbx compressor/limiter from the classic early lineup.
163A
The 163A is a discontinued dbx compressor/limiter from the classic 163 series.
560A
500 Series VCA-based compressor/limiter with OverEasy and Hard Knee curves from the industry-standard dbx 160A.
566
Discontinued dual-channel vacuum-tube compressor/limiter from dbx Professional Audio.
dbx 163X Compressor/Limiter
The dbx 163X is a discontinued single-channel compressor/limiter featuring dbx's OverEasy® compression and a single-knob "X Over Easy" control for intuitive operation. It delivered transparent, program-dependent compression in a half-rack 1U format.
dbx 164 Compressor/Limiter
The dbx 164 is a discontinued single-channel compressor/limiter in the 160 series, featuring OverEasy® compression and professional balanced I/O in a 1U rackmount enclosure. It was a staple of studio and live sound dynamics processing throughout the 1980s.
dbx 165 Compressor/Limiter
The dbx 165 is a discontinued single-channel compressor/limiter from the dbx 160 series, offering OverEasy® compression with program-dependent gain reduction and professional balanced connectivity in a 1U rackmount format.
dbx 165A Compressor/Limiter
The dbx 165A is a discontinued single-channel compressor/limiter that updated the 165 with revised circuitry, offering OverEasy® compression, a hard-limiting PeakStop™ circuit, and professional balanced I/O in a 1U rackmount enclosure.
dbx 166 Compressor/Limiter
The dbx 166 is a discontinued dual-channel compressor/limiter featuring dbx's OverEasy® compression and a PeakStop™ hard limiter in a 1U rackmount format. It was designed for studio and live sound use, offering smooth gain control with minimal audible artifacts.
dbx 166A Compressor/Limiter/Gate
The dbx 166A is a discontinued dual-channel compressor/limiter/gate in a 1U rackmount unit, adding a noise gate to the 166's OverEasy® compression and PeakStop™ limiting. It provided studio and live sound engineers with comprehensive dynamics control in a single rack space.
dbx 166AD Compressor/Limiter/Gate with Digital Output
The dbx 166AD is a discontinued dual-channel compressor/limiter/gate adding AES/EBU and S/PDIF digital outputs to the 166A's OverEasy® compression, PeakStop™ limiting, and noise gate. It bridged analog dynamics processing with digital recording systems in a 1U rackmount unit.
dbx 166AE Compressor/Limiter/Gate
The dbx 166AE is a discontinued dual-channel compressor/limiter/gate in the 166 series, featuring OverEasy® compression, PeakStop™ limiting, and a noise gate in a 1U rackmount unit. It was designed as a cost-effective professional dynamics solution for studio and live sound applications.
dbx 166XL Compressor/Limiter/Gate
The dbx 166XL is a professional dual-channel compressor/limiter/gate combining OverEasy® or hard-knee compression, a PeakStop™ limiter, and program-adaptive expander/gates in a 1U rackmount unit. It provides stereo or dual-mono operation with True RMS Power Summing™ and full sidechain functionality.
dbx 166xs Compressor/Limiter/Gate
The dbx 166xs is a dual-channel compressor, limiter, and gate in a 1U rackmount unit, featuring dbx's patented OverEasy® compression and AutoDynamic™ attack/release controls. It offers stereo or dual-mono operation with PeakStop® limiter protection and sidechain insert capability.
dbx 168A Compressor/Limiter/Gate
The dbx 168A is a discontinued 8-channel compressor/limiter/gate designed for multi-channel audio environments, featuring dbx's OverEasy® compression and PeakStop™ limiting across all channels in a 1U or 2U rackmount chassis.
dbx 262 (Project 1)
Dual-channel compressor/limiter (discontinued legacy model).
dbx 266
Dual-channel compressor/limiter/gate (discontinued legacy model).
dbx 266A
Dual-channel compressor/limiter/gate (discontinued).
dbx 266A (Project 1)
The dbx 266A is a discontinued dual-channel compressor/gate from the Project 1 series.
dbx 266XL
Dual-channel compressor/gate with AutoDynamic™ controls, OverEasy® or hard knee compression, True RMS Power Summing™, and stereo or dual-mono operation. Features balanced 1/4" TRS and XLR I/O with side chain insert.
dbx 266xs
Dual-channel compressor/gate with OverEasy® compression, AutoDynamic™ attack/release, program-adaptive expander/gates, and balanced XLR plus 1/4" TRS I/O. Supports stereo or dual-mono operation.
dbx 902
900-series rack module de-esser for controlling sibilance in vocal and instrument recordings.
dbx 903
900-series rack module compressor/limiter for dynamics control in professional audio applications.
dbx 933
900-series rack module compressor/limiter for dynamics control in professional audio applications.
Quantum II
Discontinued mastering-grade dynamics processor combining compression and equalization in a single unit, targeted at portable, tour, and studio applications.
Equalizer
1215
Dual Channel 15-Band Graphic Equalizer designed for demanding sound reinforcement with dual channels, 15 2/3 octave bands, and ISO frequency centers.
1231
Dual channel 31-band graphic equalizer designed for demanding sound reinforcement environments, with precise gain adjustments and switchable boost/cut ranges.
131
Single 31-band graphic equalizer designed for sound reinforcement environments, featuring 1/3-octave frequency bands with switchable ±6dB or ±12dB boost/cut ranges.
131s
Single 31-Band Graphic Equalizer with exceptional sound and rugged reliability for touring, studios, and audio installations.
1531P
The 1531P is a discontinued dbx graphic equalizer.
1531PM
The 1531PM is a discontinued dbx graphic equalizer.
1531X
The 1531X is a discontinued dbx graphic equalizer.
3031
Discontinued single-channel third-octave graphic equalizer from the dbx 30 Series.
3215
Discontinued dual-channel 15-band graphic equalizer from the dbx 30 Series.
3231L
Discontinued dual-channel third-octave (31-band) graphic equalizer from the dbx 30 Series.
530
500 Series 3-band fully parametric equalizer based on the classic dbx 905.
dbx 180 Parametric Equalizer
The dbx 180 is a discontinued single-channel parametric equalizer providing fully parametric control over frequency, bandwidth (Q), and gain across multiple bands in a 1U rackmount format for studio and recording applications.
dbx 2031 Graphic Equalizer/Limiter with Type III™
The dbx 2031 is a discontinued 2U dual-channel 31-band graphic equalizer integrating Type III® noise reduction, a PeakPlus® limiter, and high-quality EQ circuitry for over 120dB of dynamic range. It offers switchable ±6dB or ±15dB boost/cut ranges with comprehensive XLR, TRS, and barrier-strip connectivity.
dbx 215 Dual Channel 15-Band Equalizer
The dbx 215 is a discontinued dual-channel, 15-band graphic equalizer designed for sound reinforcement, featuring 2/3-octave Constant Q frequency bands, switchable ±6/±12dB boost/cut, and an internal toroidal transformer for quiet operation. It provides balanced XLR and TRS connectivity with 108dB of dynamic range.
dbx 215s Dual Channel 15-Band Equalizer
The dbx 215s is a dual-channel, 15-band graphic equalizer with 1/3-octave Constant Q frequency bands, switchable ±6/±12dB boost/cut ranges, and a 50Hz high-pass filter. It delivers over 112dB of dynamic range with balanced XLR and TRS connectivity for portable and touring use.
dbx 2215 Graphic Equalizer/Limiter with Type III™
The dbx 2215 is a discontinued 2U dual-channel 15-band graphic equalizer combining Type III® noise reduction, a patent-pending PeakPlus™ limiter, and high-quality EQ circuitry for up to 120dB of dynamic range. Switchable ±6dB or ±15dB boost/cut ranges with a 40Hz Bessel high-pass filter serve portable and touring applications.
dbx 2231
Dual-channel 31-band graphic equalizer with Type III Noise Reduction and PeakPlus Limiter.
dbx 231
Dual Channel 31-Band Graphic Equalizer with XLR and TRS connectivity and internal toroidal transformer.
dbx 231s
Dual Channel 31-Band Graphic Equalizer with XLR and TRS connectivity, switchable ±6/±12 dB ranges, and >112 dB dynamic range.
dbx 240
DriveRack system processor for installed, portable, and touring professional audio applications (discontinued).
dbx 241
DriveRack system processor for installed, portable, and touring professional audio applications (discontinued).
dbx 242
Professional audio processor (discontinued legacy model).
dbx 905
900-series rack module parametric equalizer for precise frequency shaping in professional audio applications.
iEQ15
Dual 15-band graphic EQ with Type V noise reduction and Advanced Feedback Suppression, offering 113 dB dynamic range and professional analog interface with digital processing.
iEQ31
Dual 31-band graphic EQ with limiter, Type V noise reduction, and Advanced Feedback Suppression, offering 113 dB dynamic range and professional analog interface with digital processing.
Noise Reduction
117
A discontinued dynamic range enhancer designed for professional audio applications.
119
A discontinued dynamic range enhancer product from dbx Professional Audio.
140
Discontinued Type II tape noise reduction system from dbx Professional Audio.
140A
The 140A is a discontinued tape noise reduction unit from dbx's classic lineup.
140X
The 140X is a discontinued tape noise reduction unit from dbx.
150
The 150 is a discontinued dbx tape noise reduction unit from the classic product lineup.
150X
The 150X is a discontinued dbx tape noise reduction unit, part of the classic 150 series lineup.
152
The 152 is a discontinued dbx Type II noise reduction unit.
154
The 154 is a discontinued dbx Type II noise reduction unit.
157
The 157 is a discontinued dbx Type II noise reduction unit.
158
The 158 is a discontinued dbx Type II noise reduction unit.
303C
Discontinued Type III noise reduction card from dbx Professional Audio.
dbx 172 Noise Reduction System
The dbx 172 is a discontinued dual-channel noise reduction unit using dbx's encode/decode noise reduction process to reduce tape hiss and noise in recording and playback systems. It was designed for use with tape recorders and other analog recording media.
dbx 760x
Rack-mount noise reduction processor for professional audio applications.
dbx 911
900-series rack module noise reduction processor for professional tape and signal processing applications.
dbx 941
900-series rack module noise reduction processor for professional audio applications.
dbx 941a
900-series rack module noise reduction processor, updated version of the 941.
dbx 942
900-series rack module Type II noise reduction processor for professional audio applications.
dbx 942a
900-series rack module Type II noise reduction processor, updated version of the 942.
dbx AFS2
The AFS2 is a stereo Advanced Feedback Suppression processor featuring a full LCD display and intuitive Wizard setup function for live sound applications. It provides 24 programmable filters per channel with dbx's patented AFS technology to automatically detect and eliminate feedback.
dbx AFS224
The AFS224 is a stereo Advanced Feedback Suppression processor featuring dbx's patent-pending AFS technology with up to 24 programmable filters per channel. Designed for portable and touring applications, it delivers transparent feedback elimination with filter Qs as narrow as 1/80 of an octave.
F900
900 Series feedback suppressor module for the dbx 900 modular signal processing system.
F900A
900 Series feedback suppressor module (A variant) for the dbx 900 modular signal processing system.
Multi Effect
dbx 480
The dbx 480 is a discontinued DriveRack multi-effect signal processor designed for installed, portable, and tour audio applications.
dbx 480P
The dbx 480P is a discontinued programmable signal processor from the dbx DriveRack family, designed for installed, portable, and tour audio applications.
dbx 480R
The dbx 480R is a discontinued DriveRack remote controller designed for use with the dbx 480P programmable signal processor.
dbx 481
The dbx 481 is a discontinued DriveRack processor designed for installed, portable, and tour audio applications.
dbx 500XR
The dbx 500XR is a discontinued digital reverb processor.
dbx 906
900-series rack module flanger/effects processor.
dbx DDP
The dbx DDP is a professional digital dynamics processor designed for studio, touring, and portable applications. It provides comprehensive dynamics processing capabilities in a rack-mount format.
dbx DriveRack 220i
The dbx DriveRack 220i is a fixed-installation system processor combining Advanced Feedback Suppression, graphic and parametric EQ, compressor, limiter, noise gate, de-esser, ducker, and 1.3 seconds of delay in a 1U format. It features 2×2 matrix mixing, switchable mic/line inputs, RS-232 PC control via DriveWare software, and wall panel control support.
dbx DriveRack 260
The dbx DriveRack 260 is a professional loudspeaker management system with 2 inputs and 6 outputs, featuring a 28-band graphic EQ, Advanced Feedback Suppression, stereo compressor, 120A Subharmonic Synthesizer, 2.7 seconds of alignment delay, and a built-in RTA with pink noise generator. A Wizard setup system with JBL speaker and Crown amplifier tunings simplifies system configuration.
dbx DriveRack 4800
The dbx DriveRack 4800 is a flagship 4-in/8-out loudspeaker management processor operating at 96 kHz with analog and AES/EBU digital I/O, 32-bit floating-point DSP, and comprehensive per-channel EQ, dynamics, feedback suppression, and crossover processing. HiQnet Ethernet networking and an optional Jensen transformer I/O option make it a flexible hub for major touring and installed sound systems.
dbx DriveRack 4820
The dbx DriveRack 4820 is a 4-in/8-out loudspeaker management processor for permanent installations, operating at 96 kHz with analog and AES/EBU digital I/O, 32-bit floating-point DSP, and a tamper-proof front panel. It delivers comprehensive per-channel EQ, dynamics, feedback suppression, and crossover processing with HiQnet Ethernet networking.
dbx DriveRack PA
The dbx DriveRack PA is a complete equalization and loudspeaker management system integrating a 28-band graphic EQ, stereo compressor, feedback eliminator, subharmonic synthesizer, and six-channel output processing with Peak Plus limiters. Built on the legendary 480 DriveRack platform, it simplifies the signal chain between mixer and amplifiers.
dbx DriveRack PA+
The dbx DriveRack PA+ is a complete loudspeaker management system with 2 inputs and 6 outputs, featuring dual 28-band graphic EQs, AutoEQ wizard with 28-band RTA, Advanced Feedback Suppression with 12 notch filters, dbx 120A Subharmonic Synthesizer, compression, and configurable crossovers up to 2×6. Preset JBL and Crown tunings enable fast professional system setup.
dbx DriveRack PA2
The dbx DriveRack PA2 is a complete loudspeaker management system with 2 inputs and 6 outputs, featuring streamlined AutoEQ, enhanced Advanced Feedback Suppression, mobile device control via iOS/Android app, dbx compression and limiting, 8-band parametric EQ, subharmonic synthesis, and 100 ms input delay. The dbx Type IV converter delivers 123 dB dynamic range with transient material.
DriveRack Premium
Loudspeaker management system providing processing between mixer and amplifiers to optimize and protect loudspeakers, featuring improved AutoEQ and AFS algorithms with Ethernet control via mobile devices.
DriveRack PX
Powered speaker optimizer with Auto-EQ, Advanced Feedback Suppression, stereo/mono subwoofer support, and Subharmonic Synthesis for enhanced bass response.
DriveRack Studio
Studio loudspeaker management system providing processing between mixer and amplifiers to optimize studio monitor systems.
DriveRack VENU360
Complete 3-input, 6-output loudspeaker management system with improved AutoEQ and AFS algorithms, Ethernet control via mobile devices, and 32-bit floating point processing.
DriveRack VENU360-B
Complete 3-input, 6-output loudspeaker management system with BLU link digital audio networking, improved AutoEQ and AFS algorithms, and Ethernet control via mobile devices.
DriveRack VENU360-D
Complete 3-input, 6-output loudspeaker management system with Dante audio networking, improved AutoEQ and AFS algorithms, and Ethernet control via mobile devices.
FS900
900 Series flanger module for the dbx 900 modular signal processing system.
Routing
dbx 400
The dbx 400 is a discontinued ZonePRO matrix routing processor for installed audio systems.
dbx BX3 mkII
The dbx BX3 mkII is a professional zone amplifier and signal routing unit designed for installed sound applications. It provides flexible distribution and management of audio signals to multiple zones.
dbx CX-1
The dbx CX-1 is a professional audio signal router for installed and touring sound applications. It provides flexible routing of audio signals between sources and destinations.
dbx CX-3 mkII
The dbx CX-3 mkII is a professional audio signal router for installed and touring sound systems. It provides flexible multi-source routing and distribution of audio signals.
dbx ZonePRO 640
6-input, 4-output digital zone processor for commercial audio installations, featuring Advanced Feedback Suppression (AFS), AutoWarmth, parametric EQ, compression, limiting, noise gating, and RS-232/wall panel control.
dbx ZonePRO 640m
6-input, 4-output fixed-architecture digital zone processor with pre-configured input/output processing, insert points, AutoWarmth on all output zones, and optional device duplication via link bus.
dbx ZonePRO 641
6-input, 4-output digital zone processor for commercial audio with Advanced Feedback Suppression (AFS), AutoWarmth, parametric EQ, compression, limiting, bandpass/crossover filters, and RS-232/wall panel control.
dbx ZonePRO 641m
6-input, 4-output fixed-architecture digital zone processor with wizard-driven configuration, hardware mic gain control, AutoWarmth on every output zone, and link bus for multi-unit duplication.
PMC16
16-channel personal monitor controller allowing performers to create custom monitor mixes with onboard Lexicon reverb, dbx limiting, and BLU link digital audio networking.
PS6
Road-worthy power supply providing AC power for up to six PMC16 personal monitor controllers via 20-foot 12V DC cables.
SC 32
32-channel digital matrix processor for installed sound systems with advanced DSP, flexible routing, and wizard-driven HiQnet System Architect configuration.
SC 64
64-channel flagship digital matrix processor for installed sound systems with 32-bit floating point DSP, advanced routing, and dual High Speed Option slots.
SC Ethernet AVB High Speed Option Card
Ethernet AVB expansion card for dbx SC 32 and SC 64 matrix processors, enabling networked digital audio transport and control via Cat 5e cable.
TR1616
16×16 analog-to-BLU link digital audio converter with precision dbx mic preamps, designed for networked personal monitor and stage mixing systems.
ZonePRO 1260
12x6 Digital Zone Processor for commercial audio applications with advanced signal processing and Ethernet control.
ZonePRO 1260m
12x6 digital zone processor with fixed I/O and pre-configured architecture for installed audio systems, including configurable insert processing and optional audio channel duplication via link bus.
ZonePRO 1261
12x6 digital zone processor with Ethernet control for commercial audio applications, providing comprehensive signal processing and routing.
ZonePRO 1261m
12x6 digital zone processor with fixed I/O, pre-configured architecture, and configurable insert processing for professional audio applications.
Dynamics
118
A discontinued dynamic range enhancer from dbx Professional Audio.
dbx 1BX DS Dynamic Range Expander
The dbx 1BX DS is a discontinued dynamic range expander adding a dynamic bass control (DS) to the standard 1BX, restoring compressed dynamic range from FM broadcasts and tape sources while also enhancing low-frequency impact.
dbx 1BX Dynamic Range Expander
The dbx 1BX is a discontinued single-channel dynamic range expander that restores the natural dynamic range compressed during FM broadcasting, tape duplication, or other bandwidth-limited transmission, providing a more lifelike listening experience.
dbx 1BX Series II Dynamic Range Expander
The dbx 1BX Series II is a discontinued updated version of the 1BX dynamic range expander, featuring revised circuitry for improved performance in restoring compressed dynamic range from FM broadcasts, cassette tapes, and other bandwidth-limited audio sources.
dbx 1BX Series III Dynamic Range Expander
The dbx 1BX Series III is a discontinued third-generation dynamic range expander, offering refined circuitry for restoring compressed dynamic range from FM broadcasts, cassette tapes, and other limited audio sources. An owner's manual is available for download from the dbx product page.
dbx 2bx
The dbx 2bx is a discontinued 2-band dynamic range expander/enhancer processor.
dbx 3bx
The dbx 3bx is a discontinued 3-band dynamic range expander/enhancer processor.
dbx 3bx DS
The dbx 3bx DS is a discontinued dynamic range expander, a variant of the 3bx series.
dbx 3bx RC
The dbx 3bx RC is a discontinued remote control unit for the 3bx dynamic range expander series.
dbx 3bx Series II
The dbx 3bx Series II is a discontinued second-generation 3-band dynamic range expander/enhancer.
dbx 4BX
The dbx 4BX is a discontinued 4-band dynamic range expander for professional audio applications.
dbx 510
The dbx 510 is a 500 Series subharmonic synthesizer module delivering patented bass enhancement technology in a single-slot format.
Filter
dbx 223
Stereo 2-Way/Mono 3-Way Crossover with Linkwitz-Riley 24dB/octave filters, independent output gain controls, and TRS balanced connectors.
dbx 223 (Project 1)
Stereo 2-Way/Mono 3-Way Crossover (discontinued legacy model).
dbx 223s
Stereo 2-Way/Mono 3-Way Crossover with Linkwitz-Riley 24dB/octave filters and TRS balanced connectors.
dbx 223XL
Stereo 2-Way/Mono 3-Way Crossover with XLR balanced connectors and Linkwitz-Riley 24dB/octave filters.
dbx 223xs
Stereo 2-Way/Mono 3-Way Crossover with XLR balanced connectors and Linkwitz-Riley 24dB/octave filters.
dbx 234
Stereo 2/3-Way, Mono 4-Way Crossover with Linkwitz-Riley 24dB/octave filters and TRS balanced connectors.
dbx 234 (Project 1)
Stereo 2/3-Way, Mono 4-Way Crossover (discontinued legacy model).
dbx 234s
Stereo 2/3-Way, Mono 4-Way Crossover with Linkwitz-Riley 24dB/octave filters and TRS balanced connectors.
dbx 234XL
Stereo 2/3-Way, Mono 4-Way Crossover with XLR balanced connectors and Linkwitz-Riley 24dB/octave filters.
dbx 234xs
Stereo 2/3-Way, Mono 4-Way Crossover with XLR balanced connectors and Linkwitz-Riley 24dB/octave filters.
dbx 274 (Project 1)
The dbx 274 is a discontinued 4-way crossover/multiband processor from the Project 1 series.
dbx 290 (Project 1)
The dbx 290 is a discontinued 3-way crossover/multiband processor from the Project 1 series.
Preamp
1086
Discontinued microphone preamp from dbx Professional Audio, designed for studio applications.
576
Discontinued tube microphone preamp from dbx Professional Audio.
580
500 Series microphone preamp delivering sonically-transparent gain with EQ, instrument input, and 60dB of headroom.
dbx 286A
Single-channel microphone preamp processor combining a sonically pristine mic preamp with OverEasy® compressor, frequency-tunable de-esser, HF/LF enhancer, and expander/gate. Features XLR mic input with +48V phantom power and balanced 1/4" TRS outputs.
dbx 286A (Project 1)
The dbx 286A (Project 1) is a discontinued microphone preamp processor from the Project 1 series, combining a mic preamp with compressor, de-esser, enhancer, and expander/gate.
dbx 286s
Single-channel microphone preamp and channel strip processor combining a studio-quality mic/instrument preamp with OverEasy® compressor, frequency-tunable de-esser, HF/LF enhancer, and program-adaptive expander/gate. Features XLR mic input with +48V phantom power.
dbx 376
Single-channel tube channel strip with mic preamp, 3-band parametric EQ, OverEasy® compressor, de-esser, and AES/EBU plus S/PDIF digital outputs. Features a 200V tube plate voltage mic preamp and dbx Type IV® A/D conversion.
dbx 386
Dual-channel vacuum tube microphone preamplifier combining tube warmth with dbx Type IV® A/D conversion. Features AES/EBU and S/PDIF digital outputs, word clock sync I/O, 60dB of gain, +48V phantom power, 20dB pad, and selectable sample rates up to 96kHz.
dbx 586
Dual-channel vacuum tube microphone preamplifier with XLR and 1/4" I/O, 48V phantom power, high-pass filter, insert points, and limiter on each channel.
dbx 676
Single-channel Class-A tube microphone preamp channel strip featuring high-voltage gain (250V DC), a compressor/limiter based on the dbx 162SL, and a 3-band semi-parametric EQ with VU metering.
dbx 786
Single-channel solid-state reference-grade microphone preamplifier designed for studio recording, providing high-transparency gain with XLR mic input and line outputs.
MiniPre
Compact microphone preamplifier for studio applications.
Control Surface
MC6
Zone controller faceplate for dbx zone management systems, providing local control in portable, tour, and studio environments.
ZC-BOB
Wall-mounted breakout box enabling home-run or parallel wiring of multiple ZC zone controllers to dbx DriveRack and ZonePRO devices via CAT5 cabling.
ZC-FIRE
ZonePRO fire safety interface that triggers system mute or scene selection when activated by relay or control voltage from a fire alarm system.
ZC1
Wall-mounted zone controller providing programmable rotary potentiometer volume control for dbx DriveRack 220i, 260, and ZonePRO devices via CAT5 cabling.
ZC2
Wall-mounted zone controller providing programmable rotary potentiometer volume control with push-button muting for dbx DriveRack 220i, 260, and ZonePRO devices.
ZC3
Wall-mounted zone controller with programmable rotary switch for source selection, scene selection, or page steering on dbx DriveRack 260, 220i, and ZonePRO devices.
ZC6
Wall-mounted zone controller providing programmable volume control for ZonePRO devices via CAT5 cabling.
ZC7
Wall-mounted zone controller with programmable push-to-talk button for page assignment and source control on dbx ZonePRO devices.
ZC8
Wall-mounted zone controller combining push-button volume control with rotary switch source selection for dbx ZonePRO devices.
ZC9
Wall-mounted zone controller with rotary switch source selection and DIP switch identification for dbx DriveRack and ZonePRO devices.
Expander
363X
Discontinued dual-channel gate/expander from dbx Professional Audio.
dbx 263A
Dual-channel expander/gate (discontinued legacy model).
dbx 263X
Dual-channel expander/gate (discontinued).
dbx 463X
The dbx 463X is a discontinued expander/gate processor.
dbx 504X
The dbx 504X is a discontinued expander/gate processor for studio, tour, and portable audio applications.
dbx 704x
Rack-mount expander/noise gate designed for studio, touring, and portable applications.
Di Box
dbx db10
The dbx db10 is a passive direct injection box featuring a custom mu-metal-shielded transformer, gold-plated Neutrik XLR output, and a 3-way pad switch (0/20/40 dB) for handling instrument, line, and speaker-level signals. It provides transformer-isolated, balanced XLR output with a parallel thru jack for amp connection.
dbx db12
The dbx db12 is a phantom-powered active direct injection box featuring a custom mu-metal-shielded transformer, gold-plated Neutrik XLR output, and a 3-way pad switch for handling instrument through speaker-level signals. A green LED phantom power indicator confirms active operation.
dbx Di1
The dbx Di1 is a compact active direct injection box ideal for studios and live use, converting high-impedance instrument and line signals to balanced XLR output while rejecting noise. It operates on both +18V to +48V phantom power and a 9V battery, with ground lift, attenuation, and main/standby controls.
dbx DI4
The dbx DI4 is a 4-channel active direct box and stereo line mixer in a half-rack unit, providing four independent DI channels with individual XLR outputs plus a stereo line mixer output. Per-channel pad switches, ground lift, volume, and pan controls allow keyboards and modules to be routed to both FOH and monitors independently.
dbx DJDI
The dbx DJDI is a 2-channel passive direct box designed specifically for DJ and line-level sources, converting unbalanced signals to balanced XLR outputs across a wide range of signal levels. A continuously variable input attenuator, transformer isolation, and ground lift switch ensure clean, interference-free output.
Utility
dbx CT-2
The dbx CT-2 is a portable cable tester with a 6-position rotary selector that tests a wide range of audio and data cable connector types. Well-illuminated LED indicators and a banana connector continuity tester with audible beeper provide fast, reliable cable diagnostics.
dbx CT-3
The dbx CT-3 is an advanced two-piece cable tester supporting up to 8-pin cables across a wide variety of connector formats including RJ45, RJ11, XLR, TRS, DMX, MIDI, BNC, and more. Its split Sender/Receiver chassis enables testing of pre-installed and long cables in the field.
dbx DIO
The dbx DIO is a professional digital I/O converter for studio, touring, and portable applications. It provides conversion between analog and digital audio formats.
PB48
48-point 1/4" patch bay for reliable signal routing in studio, tour, and portable applications, available in half-normalled or de-normalled configurations.
PB48 (Original)
Original 48-point patch bay for signal routing in portable, tour, and studio applications.
Creative
120A
A discontinued subharmonic synthesizer that creates bass notes exactly one octave below the original audio using patented Waveform Modeled™ synthesis technology.
120X
A discontinued subharmonic synthesizer designed for portable and touring applications, adding synthesized low-frequency enhancement to audio systems.
120X-DS
A discontinued digital series subharmonic synthesizer from dbx Professional Audio, recommended for portable and tour applications.
120XP
A discontinued subharmonic synthesizer designed for portable and tour applications, adding low-frequency enhancement to audio systems.
Gate
1074 QuadGate
A discontinued 4-channel noise gate with independent threshold, depth, and release controls per channel, built on dbx V2 VCA technology.
563X
Discontinued noise gate / expander from dbx Professional Audio.
dbx 904
900-series rack module noise gate for gating and silencing of unwanted noise between signals.
dbx 929
900-series rack module noise gate for controlling unwanted noise and leakage in professional audio signals.
Amplifier
Channel Strip
goRack
Compact portable speaker processor with anti-feedback suppression, compression, sub-harmonic synthesis, and 16 genre-based EQ presets, based on DriveRack PA2 software.
ProVocal
Vocal processor channel strip combining microphone preamplification, compression, and equalization for live and studio vocal processing.
De Esser
520
500 Series de-esser based on the legendary dbx 902 that tames excessive sibilance in vocals and high-frequency dense material.
dbx 296 (Project 1)
The dbx 296 is a discontinued de-esser processor from the Project 1 series.
Mixer
Cable
USB-to-Serial Cable
USB to DE-9 serial adapter cable tested and verified for use with dbx and BSS serial-controlled professional audio products.
Headphone Amp
IEM
In-ear monitor personal monitor distribution and amplification system for portable, tour, and studio applications.
Mastering
Quantum
Mastering-grade dynamics processor for portable, tour, and studio applications.
Microphone
RTA-M Reference Microphone
Omnidirectional measurement microphone designed for real-time audio analysis with dbx DriveRack PA series and 260 processors.