Syntonie

A quadrature low frequency oscillator with triangle, sine and square waveform outputs, each with 4 outputs 90 degrees apart. Features coarse and fine tune controls and a CV input to modulate frequency.

Expander module that adds 4 additional waveforms (saw, trapezoid, shark, chainsaw) to the Animate oscillator, connecting via two 4-pin connectors for power and shared waveforms.

A triple multiplier with three identical channels, featuring manual and voltage control over amplitude, and a mode switch selecting between VCA/crossfade and two four-quadrant multiplier modes.

A circuit bent video enhancer meant to process Composite video, generating effects ranging from soft color shifts to heavy distortion, with a CV input and attenuator to control contrast. Requires a Eurorack case and power supply.

A circuit bent video enhancer meant to process Composite video, generating effects ranging from soft color shifts to heavy distortion, with a CV input and attenuator to control contrast. This standalone version comes assembled in an enclosure with a +12V DC wall wart.

A triple analog combiner aimed at combining two signals in various ways such as average, difference, min, max, XOR and mix, useful for combining video signals to create 2D shapes.

A triple exponential and logarithmic shaper with three identical channels, featuring manual and voltage control over the curve of the input signal, transitioning from exponential to linear to logarithmic.

A Composite/Component video filter based around a lowpass/highpass filter that can soften/blur or enhance/sharpen the incoming video signal, with frequency, resonance and dry/wet controls. Requires a Eurorack case and power supply.

A Composite/Component video filter based around a lowpass/highpass filter that can soften/blur or enhance/sharpen the incoming video signal, with frequency, resonance and dry/wet controls. This standalone version comes assembled in an enclosure with a +12V DC wall wart.

A Component to RGB colorspace converter and luma processor that decodes SD/HD Component video to 1V RGBY outputs, with a processor section featuring attenuverter and offset controls.

A triple wave shaper that shapes a triangle signal into sine, antisine, exponential, logarithmic, trapezoid, antitrapezoid and asymmetric folding wave forms, pairing well with oscillators and ramps.

A triple 3-bit posterizer that quantizes an input signal into 8 equal steps using an ADC/DAC, with a bitswap feature that swaps bits together to create colorization effects.

A 1x3 matrix mixer with its outputs normalized to 3 VCAs, allowing any of three inputs to be mixed to any of three outputs with dedicated attenuators, plus a VCA section for amplitude control.

A dual video rate oscillator featuring two independent oscillators with selectable sync, frequency and amplitude modulation, square and triangle/sawtooth wave outputs, plus a mix output.

A video ramp generator and sync extractor producing horizontal and vertical ramps, mirrored ramps, sync outputs, and 2D shapes such as diamond, rectangle, cross, star and ellipse.

Seuils is a Eurorack module built around a comparator and boolean logic circuit designed to phase shift ramp/saw signals. It generates pulse and shift outputs with three channels offering AND, OR and XOR logic combinations.

Solaire is a Eurorack module combining a quad full wave rectifier with a triple 2:1 mixer, with normalisation between rectifier stages and mixers. It can convert ramp/saw waves into triangles, double triangle frequencies, and create solarization-type folding effects.

Sortie is a Eurorack RGB to Composite/S-video/Component encoder and sync generator supporting SD and HD standards. It automatically selects the video standard when an external sync signal is present.

Stable is a Eurorack module combining a processing amplifier and glitch stabilizer for Composite/Component video. It provides control over contrast, brightness, hue and saturation while extracting and re-inserting synchronization to keep the output signal stable.

VU001B is a video distribution amplifier used to distribute a Composite video signal to multiple monitors or capture devices, or to distribute sync across multiple modular systems.

VU001C is a triple video distribution amplifier module aimed at distributing Component video to multiple monitors/capture devices, or three independent Composite or sync signals.

VU003B is a Eurorack Component to RGB decoder and luma processor, converting SD/HD Component (YPbPr) video to 1V RGBY outputs with a normalized processor input for contrast and brightness control. Sold as a DIY PCB set.

VU004 is a quad inverter Eurorack module that inverts a signal while keeping it between 0-1V. Sold as a DIY PCB set.

VU006 is a low frequency to audio rate quadrature oscillator Eurorack module, outputting four sinewaves 90 degrees apart, based around two self-oscillating filters. Sold as a DIY PCB set.

VU007 is a Eurorack module that encodes 1V RGB video into SD Component video, using a 14pin sync cable for composite sync and blanking. Sold as a DIY PCB set.

VU007B is a Eurorack RGB to Composite/S-Video/Component encoder with an integrated sync generator supporting multiple SD and HD video standards. Sold as a DIY PCB set with pre-populated SMD parts.

VU008 is a Eurorack module that phase shifts ramp/saw signals, resulting in horizontal/vertical displacement, and waveshapes sine/triangle signals. Sold as a DIY PCB set.

Stable is a standalone processing amplifier and glitch stabilizer for Composite/Component video. It provides control over contrast, brightness, hue and saturation while extracting and re-inserting synchronization to keep the output signal stable.