Dekoni

A balanced 4-pin XLR cable engineered for Sennheiser HD800, HD800S, and HD820 headphones, using a braided design to minimize noise and improve signal integrity.

A balanced 4.4mm Pentaconn cable designed for Sennheiser HD600 series headphones. It uses a braided construction intended to improve soundstage and clarity over the stock cable.

A 52-inch PCUHD copper modular headphone cable terminated in a 1/4-inch jack and 2-pin Utopia Lemo connectors.

A 64-inch nylon-wrapped headphone cable terminated in a 1/4-inch plug on one end and 3.5mm modular connectors on the other, built on Dekoni's Modular Cable System.

A 64-inch nylon-wrapped modular headphone cable with a 1/4-inch jack and 4-pin mini XLR headphone connectors.

A 64-inch nylon-wrapped modular headphone cable with a 1/4-inch jack and HD600-style headphone connectors for Sennheiser HD600-series headphones.

A 64-inch PCUHD braided copper modular headphone cable with a 1/4-inch jack and 4-pin mini XLR headphone connectors.

A 64-inch braided silver-plated copper modular headphone cable with a 1/8-inch jack and gold-plated 3.5mm headphone connectors.

A 64-inch braided modular headphone cable with a 1/8-inch jack and 4-pin mini XLR headphone connectors.

A 64-inch braided modular headphone cable with a 1/8-inch jack and an ATHM-style connector for Audio-Technica ATH-M series headphones.

A 64-inch braided modular headphone cable with a 1/8-inch (3.5mm) jack and HD600-style headphone connectors.

A 64-inch braided modular headphone cable with a 1/8-inch jack and a single 3-pin XLR headphone connector.

A 64-inch blue nylon-jacketed modular headphone cable with gold-plated 3.5mm connectors.

A 64-inch blue nylon-jacketed modular headphone cable with 3.5mm and 4-pin Mini XLR connector options.

A 64-inch nylon-jacketed modular headphone cable with a 1/8-inch connector matched to ATH-M series headphones.

A 64-inch nylon-jacketed modular headphone cable with HD600 headphone connectors.

A 64-inch blue nylon-jacketed modular headphone cable with a single 3-pin XLR headphone connector.

A balanced 2.5mm TRRS headphone cable custom-wired for Grell OAE1 and Crosszone OAE2 headphones.

A 3-meter braided PCUHD copper extension cable designed to lengthen the Dekoni Ensemble modular cable system.

A 3-meter braided silver-plated copper extension cable designed to lengthen the Dekoni Ensemble modular cable system.

A modular balanced headphone cable with 4-pin XLR termination and Utopia Lemo 2-pin connectors, built with braided copper shielding for reduced interference.

A modular balanced headphone cable with 4-pin XLR termination and 4-pin Mini XLR connectors, featuring braided copper construction.

A 64-inch braided modular cable terminated with a 4-pin XLR connector and dual 3.5mm headphone connectors, for balanced headphone systems.

A 64-inch braided modular cable terminated with a 4-pin XLR connector and 4-pin mini XLR headphone connectors.

A balanced 4-pin XLR headphone cable with a braided design and HD600-style connectors, part of Dekoni's modular cable system.

A balanced 4.4mm audio cable with 3.5mm headphone connectors and a braided exterior with gold-plated connectors for reduced interference.

A balanced headphone cable with 4.4mm and 4-pin Mini XLR connectors, built with braided shielding for improved audio clarity.

A balanced 4.4mm to 3.5mm nylon-wrapped headphone cable using Dekoni's modular cable system for durability and versatility.

A balanced 4.4mm cable with 4-pin Mini XLR connectors and blue nylon wrap construction for durable balanced audio use.

A balanced 4.4mm nylon-wrapped cable designed for Sennheiser HD600-series headphones.

A 64-inch balanced braided cable with a 4.4mm connector and 3.5mm headphone connectors, featuring gold-plated connectors for durability and clarity.

A 64-inch balanced headphone cable with 4.4mm and 4-pin Mini XLR connectors built with premium braided materials.

A 64-inch braided balanced cable with a 4.4mm connector and modular HD600 headphone connectors.

A 64-inch balanced 4.4mm nylon-wrapped cable with dual 3.5mm headphone connectors for versatile compatibility.

A 64-inch balanced 4.4mm nylon-wrapped cable designed for Sennheiser HD600-series headphones.

A 64-inch balanced headphone cable with 4.4mm to 4-pin Mini XLR connectors and a blue nylon woven jacket.

A Y-split cable section custom-fitted for grell OAE1 and Crosszone OAE2 headphones, using PCUHD copper conductors to connect to Dekoni's modular Ensemble cable system.

A Y-split cable section molded for Sennheiser HD800, HD800S, and HD820 headphones, made from PCUHD copper for connecting to Dekoni's modular Ensemble cable system.

A post-split cable with a single 3-pin Mini XLR connector for Beyerdynamic DT PRO series and select AKG headphones, part of Dekoni's modular cable system.

A compact headphone adapter converting between 1/4-inch and 3.5mm connections, built with gold-plated connectors for reliable, noise-free connections.

A 1-meter modular extension cable for the Dekoni Ensemble cable system, built with braided PCUHD copper conductors for a low-resistance, warm signal path.

A 1-meter modular extension cable for the Dekoni Ensemble cable system, built with a silver-plated copper core to enhance transient speed and soundstage transparency.

A 52-inch braided headphone cable with 1/4" and 3.5mm gold-plated connectors, part of Dekoni's modular Ensemble cable system.

A 52-inch balanced headphone cable featuring dual 4-pin mini XLR connectors and a 1/4" jack, built with Dekoni's modular cable system technology.

A 52-inch braided cable with gold-plated 1/4" connectors and 2-pin HD600 connectors, designed for Sennheiser HD600-series headphones as part of Dekoni's modular cable system.

A 52-inch nylon-wrapped headphone cable with 1/4" to 3.5mm gold-plated connectors, part of Dekoni's modular cable system.

A 52-inch nylon-wrapped headphone cable combining a 1/4" TRS connector with 4-pin mini XLR connectors, part of Dekoni's modular cable system.

A 52-inch nylon-wrapped replacement cable with a 1/4" jack and proprietary HD600 connectors for Sennheiser HD600-series headphones.

A 64-inch silver braided cable with gold-plated 1/4" and 3.5mm connectors, part of Dekoni's modular Ensemble cable system.

A 64-inch braided headphone cable with 4-pin mini XLR connectors and a 1/4-inch jack, part of Dekoni's modular Ensemble cable system.

A 64-inch braided cable with 1/4" TRS and ATHM connectors, part of Dekoni's modular Ensemble cable system for Audio-Technica ATH-M series headphones.

A 64-inch braided cable with interchangeable HD600 connectors and 1/4" and 3.5mm connectivity, part of Dekoni's modular Ensemble cable system.

A 64-inch silver-plated copper braided cable with a 1/4" output and single 3-pin XLR headphone connector, part of Dekoni's modular Ensemble cable system.

A 64-inch blue nylon-jacketed cable with 1/4" and ATHM connectors, part of Dekoni's modular Ensemble cable system.

A 64-inch nylon-jacketed cable with 1/4" and single 3-pin XLR connectors, part of Dekoni's modular Ensemble cable system.

A modular post-split IEM cable section with PCUHD pure copper conductors and 0.78mm 2-pin connectors, delivering a warmer, full-bodied sound signature.

A modular post-split IEM cable section with silver-plated copper (SPC) braided construction and 0.78mm 2-pin connectors for detailed, clear audio.

A modular post-split cable with PCUHD pure copper construction and Hirose connectors designed for Dan Clark Audio headphones, separating left and right channels with color-coded conductors.

A modular post-split IEM cable with secure MMCX connectors and PCUHD pure copper construction, delivering enhanced low-end response and midrange warmth.

A modular post-split IEM cable with MMCX connectors and silver-plated copper (SPC) braided construction for a balanced, refined listening experience.

A post-split cable segment of Dekoni's Modular Cable System that connects a presplit cable to headphones with Mini XLR inputs. Built with PCUHD pure copper conductors and a braided design.

A post-split cable component of Dekoni's Modular Cable System that connects to Audio-Technica ATH-M series headphones. Uses silver-plated copper conductors under a silver braided jacket.

A post-split cable in Dekoni's Modular Cable System that connects to headphones with single 3-pin mini XLR inputs from brands like Beyerdynamic and AKG. Features a silver braided jacket over silver-plated copper conductors.

A modular post-split cable featuring dual gold-plated 3.5mm connectors and a durable blue nylon woven jacket, part of Dekoni's Modular Cable System.

A modular post-split cable with dual gold-plated 3.5mm connectors and silver braided construction designed to minimize interference and maximize signal integrity.

A modular post-split cable featuring 4-pin mini-XLR connectors and a durable blue nylon woven jacket for professional audio applications.

A modular post-split cable with 4-pin mini-XLR connectors and silver braided construction providing superior shielding and signal integrity.

A modular post-split cable section engineered specifically for Sennheiser HD600 series headphones, wrapped in a tangle-resistant blue nylon woven jacket.

A modular post-split cable designed specifically for Sennheiser HD600 series headphones, featuring polished metal connectors and premium silver braided shielding.

A presplit cable in Dekoni's Modular Cable System that connects an audio source to post-split headphone configurations via a 3.5mm connector. Built with silver-plated copper conductors under a silver braided jacket.

A presplit cable in Dekoni's Modular Cable System that runs from the audio source to an Ensemble post-split headphone cable via a 3.5mm connector. Built with silver tinsel wire conductors under a blue nylon woven jacket.

A presplit balanced cable with 4.4mm connectors and a nylon woven jacket, part of Dekoni's Modular Cable System that connects to a modular postsplit cable for headphones.

A 52-inch presplit balanced cable with 4.4mm connectors and silver braided construction, part of Dekoni's Modular Cable System that connects to a modular postsplit cable for headphones.

A 52-inch presplit cable in Dekoni's Modular Cable System that connects an amplifier or DAC to an Ensemble Y-splitter. Built with PCUHD twisted copper conductors and a 4-pin Neutrik XLR balanced connector.

A 52-inch presplit cable in Dekoni's Modular Cable System that connects an amplifier, DAC or audio source to an Ensemble Y-splitter. Features PCUHD twisted copper conductors and a 6.35mm unbalanced connector.

A presplit unbalanced cable with 6.35mm connectors and a nylon woven jacket, part of Dekoni's Modular Cable System for headphones and monitors.

A 52-inch presplit unbalanced cable with 6.35mm connectors and silver braided construction, part of Dekoni's Modular Cable System for headphone amplifiers and studio equipment.

A 52-inch presplit balanced cable in Dekoni's Modular Cable System that links an audio source to an Ensemble post-split headphone cable. Uses silver-plated copper conductors under a silver braided jacket with a 4-pin XLR connector.

A 52-inch presplit USB-C cable with an integrated CS43131 DAC/AMP chipset and silver braided construction, part of Dekoni's modular Ensemble cable system.

A Y-split cable in Dekoni's Modular Cable System designed as the upper section for headphones with standard 3.5mm TS earcup jacks. Built with PCUHD braided copper conductors.

A padded softshell carrying case for headphones, cables, and DACs, with extra internal depth for thick or permanently attached cables.

A post-split cable component for Audio-Technica ATH-M series headphones, using nylon-wrapped silver tinsel wire as part of Dekoni's modular cable system.

A post-split cable with 2-pin Lemo connectors and twisted copper conductors designed for Focal Utopia headphones, part of Dekoni's modular cable system.

Sheepskin replacement earpads developed with Meze Audio for the Meze 99, 99 Classic, 99 Neo, and 99 Elite headphones, designed to improve comfort and sound.

An internal foam baffle accessory for 50mm driver headphones that enhances bass response and smooths harsh treble, originally designed for the Dekoni x HiFiMan Cobalt.

Choice Leather and Choice Suede replacement earpads with memory foam engineered for Bose QC Ultra and Ultra 2.0 headphones to restore ANC seal and comfort.

Choice Suede replacement earpads with memory foam engineered for the Audio-Technica ATH-R50x open-back headphones to improve comfort and reduce clamp fatigue.

A closed-back dynamic driver headphone engineered by Dekoni in partnership with Hifiman, featuring a carbon-coated diaphragm for studio-quality sound with padded ear cups and an adjustable headband.

Custom-designed replacement earpads that click onto the Philips SHP9500's mounting system, improving comfort and sound quality without tools or adhesives.

Replacement earpads built with dense memory foam for the Sony WH-1000XM4 headphones, designed to restore ANC performance and improve comfort. Available in Platinum protein leather, Choice Leather, and Choice Suede materials.

Custom-engineered memory foam replacement earpads for the HiFiMan Cobalt, HE-R9, and Drop HE-R7DX headphones, designed to improve comfort and acoustic performance.

Jerzee Series replacement ear pads engineered for Beats Solo 2.0 and 3.0 on-ear headphones to restore comfort and sound isolation.

Midnight Series replacement ear pads engineered for Beats Studio 2.0 and 3.0 headphones to improve sound isolation and comfort.

Replacement earpads purpose-designed for the HiFiMan Susvara headphones, made from fenestrated sheepskin to preserve the headphone's soundstage while improving comfort.

Sheepskin replacement earpads engineered for Dan Clark Audio Aeon 2 headphones, designed to improve comfort and maintain sound clarity.

Sheepskin replacement earpads engineered for Meze Liric headphones, designed to improve comfort, breathability, and bass response.

A felt spacer ring accessory that installs on Audeze LCD series headphones to prevent driver crinkle noise and improve comfort and sound quality.

Fenestrated sheepskin replacement earpads for AKG K601, K701, K702, K712 Pro and compatible models, designed to reduce harshness and add midrange warmth.

Fenestrated sheepskin replacement earpads for the Abyss Diana, Diana Phi, Diana TC, and Diana V2 headphones.

Custom hybrid replacement earpads combining sheepskin and elite velour materials, designed specifically for the FiiO FT1 headphones to enhance comfort and sound.

A kit of multiple density foam sheets that can be trimmed and placed over headphone drivers to attenuate high frequencies and customize the sound signature.

Replacement foam earpads engineered to restore Koss Porta-Pro and compatible headphones to like-new condition. Precision-engineered for a secure fit and improved comfort and acoustic performance.

Replacement memory foam earpads with fabric covering for Beats Studio 2.0 and 3.0 headphones. Designed to improve comfort and sound isolation over the original pads.

Custom-tuned replacement earpads made with memory foam and breathable fabric for the Sennheiser and EPOS GSP 300 series gaming headsets, improving comfort and sound isolation.

Protein leather replacement earpads with low-density foam engineered for Focal Listen series headphones to improve comfort.

Replacement leather earpads engineered for KRK KNS 6400 and 8400 studio headphones, designed to improve comfort and sound isolation during mixing and mastering sessions.

Velour replacement earpads for Sennheiser HD280 studio headphones, engineered with high-density padding for comfort and an open, breathable soundstage.

A pair of adhesive mounting rings for securely attaching replacement earpads to Audeze LCD series headphones.

Leather replacement earpads designed for Audeze Maxwell 2 gaming headphones to improve comfort and acoustic performance.

Premium replacement earpads for the Audeze MM500 and LCD-5 headphones, available in Elite Hybrid, Elite Suede, and Elite Velour materials.

Elite Velour replacement earpads for Beats Studio 2.0 and 3.0 headphones, designed to improve comfort and acoustic isolation.

Sheepskin and memory foam replacement earpads designed for Focal Bathys, Bathys MG, Hadenys, Azurys, and Lensys headphones to improve comfort and sound.

Memory foam replacement earpads engineered for Fostex TH-X00 and TH-900 series headphones to improve comfort and maintain acoustic integrity.

Custom Series replacement earpads for Grado GS, PS, and RS series headphones, featuring engineered foam and velour materials for comfort and tuning options.

Elite Series replacement earpads for HiFiMan Arya headphones, available in sheepskin, fenestrated sheepskin, and hybrid materials to customize comfort and sound signature.

Replacement earpads for Marshall Major headphones (I-V) made from premium Choice Suede material for improved comfort and sound isolation.

Replacement earpads designed for Meze 109Pro, M105 Silva, and M105 Aer headphones.

Replacement earpads for Sennheiser HD700 series headphones featuring memory foam construction for improved comfort and sound.

Elite and Fenestrated sheepskin replacement earpads engineered for Sennheiser HD820 closed-back headphones, allowing users to tune comfort and sound signature.

Replacement earpads for the Sennheiser Momentum 4 wireless headphones, available in leather or suede, designed to improve comfort during extended wear.

Replacement earpads for Sony WH-1000XM6 headphones available in Choice Suede, Protein Leather, and Alpine materials to improve comfort and maintain noise cancellation performance.

Replacement earpads for the Fostex T20RP, T40RP, and T50RP series headphones and compatible models, available in Sheepskin, Limited Edition PL, and Elite Velour materials.

Replacement earpads for the Sennheiser GSP 500, 600, and 670 headsets, as well as the EPOS H6 Pro, offered in Jerzee and Midnight materials.

Replacement earpads for the Sennheiser HD25, HD25 Light, HD25 Plus, and HD25 Pro headphones, available in Midnight and Jerzee materials.

A padded replacement headband cover for Beyerdynamic headphones designed to restore comfort and extend the life of the headphones.

A genuine sheepskin leather replacement headband designed for AudioQuest NightHawk and NightOwl headphones to restore comfort and durability.

Oval replacement earpads compatible with studio monitor headphones and communication headsets such as Audio Technica ATH-M50X and Sony MDR-7506, designed to restore comfort and sound isolation.

Premium suede replacement earpads designed specifically for the Noble Fokus Apollo headphones, improving comfort and sound isolation while maintaining tonal characteristics.

Universal 100mm replacement earpads designed for Beyerdynamic DT series and AKG professional headphone models to restore comfort and sound quality.

Slow-rebound memory foam eartips with a 3mm bore designed to conform to the ear canal for improved seal, isolation, and comfort on in-ear monitors.

A cleaning kit for headphones featuring a non-abrasive cleaning spray and premium microfiber cloths. Removes skin oils, sweat and dust from ear pads and headphone finishes.

A magnetic phone holder accessory that secures a portable DAC/AMP to the back of a smartphone using magnetic adhesion and an elastic band.

Slow-rebound memory foam eartips designed to replace stock silicone tips on AirPods Pro and AirPods Pro 2, improving seal, isolation, and comfort.

Memory foam replacement eartips designed for Apple AirPods Pro 3 that create a superior seal, improve comfort, and enhance noise isolation and bass response.

Slow-rebound memory foam eartips designed for the Samsung Galaxy Buds Pro, offering a custom seal, improved sound isolation, and a secure grippy fit.

Slow-rebound memory foam ear tips designed for the Samsung Galaxy Buds2 Pro, providing enhanced comfort and noise isolation. Available in small, medium, and large sizes.

A memory foam replacement headband designed for the Sennheiser HD600 Series to reduce pressure points and improve comfort during extended listening sessions.

Replacement ear pads for the Sony MDR-Z1R combining sheepskin leather with slow-rebounding memory foam. Designed to improve comfort, sound isolation, and soundstage.

High-density slow-rebound memory foam eartips with a 4.9mm bore that conform to the ear canal for improved isolation, comfort, and secure fit on in-ear monitors.

A 4-pack of soft padded cushions that attach to headphone headbands to redistribute weight and relieve pressure hotspots during extended listening.

A one-size-fits-all headphone display stand with a minimalist curved design and sturdy base for holding and showcasing headphones.

Slow-rebound memory foam ear tips engineered for true wireless earbuds, designed to fit inside charging cases while providing comfort and passive noise isolation. Available in small, medium, and large sizes.

Premium replacement earpads for AKG K371, K361, K361-BT, and K371-BT headphones, also compatible with Sony MDR-7506 and MDR-V6. Available in Elite Velour, Choice Leather, Choice Suede, and Sheepskin materials.